Sharp DV-HR300U DV-HR300U Operation Manual - Page 36
Time Shift Viewing/Chasing Playback
![]() |
View all Sharp DV-HR300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Time Shift Viewing/Chasing Playback With this Recorder, you can enjoy Time Shift Viewing and Chasing Playback-distinctive features of a HDD. 1 Time Shift Viewing While you are watching a program, the phone rings.... At times like this, you can pause the program by pressing a button and watch the rest later. NOTE • Some programs may not allow you to time shift view due to copyright of the programs. • Programs recorded for Time Shift Viewing will be erased automatically if Time Shift Viewing is canceled. Time Shift Viewing (Pause) You can pause during sudden phone call or when you want to take a note. In such cases press TIME SHIFT to pause. Press | PLAY to watch the rest of the program. Pause scene Current scene (live) Time shift recording Press TIME SHIFT. Press | PLAY. Press ■ STOP/LIVE to return to the current (live) broadcast. (Time shift recording stops at this point. Recorded programs will be erased automatically.) 2 Chasing Playback You return home earlier than expected while timer recording is in progress.... At times like this, you can watch the program from the beginning without having to wait for the recording to finish. Chasing Playback (Pause➔Play) Press | PLAY during recording or timer recording to watch the recorded program from the beginning. Current scene (live) Recording Recording continues Playback from beginning Press | PLAY. Playback starts from the beginning of the program. (Recording continues) NOTE • When remaining capacity of HDD during Time Shift Viewing is gone, Time Shift Viewing will be canceled. The current (live) broadcast will be displayed and the recorded programs will be erased. You cannot view the recorded part of the program. • A message will be displayed 5 minutes before timer recording (or timer dubbing) starts. If you are time shift viewing, it will stop 3 minutes later. Fast Reverse/Forward Playback If you press G REV or J FWD during Time Shift Viewing or Chasing Playback, Fast Reverse/Forward Playback starts. If you press G REV (or J FWD) again, the speed of Fast Reverse/Forward Playback changes as shown below. (You cannot listen to audio during Fast Reverse/Forward Playback.) (Approx. 2g) (Approx. 8g) (Approx. 32g) NOTE • If you perform Fast Forward Playback during Time Shift Viewing or Chasing Playback, the Recorder will automatically switch to the playback screen when Fast Forward Playback reaches about 30 seconds before the live broadcast. The timing that goes automatically back to playback mode will slightly differ depending on the speed of Fast Forward and Recording Mode. • When the unit automatically goes back to normal Playback during , you can still view the program in Fast Forward Playback up to the point of the live broadcast by performing or . 36
![](/manual_guide/products/sharp-dvhr300u-dvhr300u-operation-manual-cac2cfb/36.png)