Sharp DV-HR300U DV-HR300U Operation Manual - Page 72

DVD/CD Playback 4 Press SET/ENTER when you reach the scene you want to end Repeat Playback. • The end point of the part (B) will be memorized and the Repeat Playback for the specified part (A-B) starts. 5 Press (INPUT) to return to normal playback. Function Control You can do things like specify a title or chapter, and adjust settings for video and audio if you press FUNCTION (under the cover) during playback. (For details see page 75.) Switching Audio You can change the audio output channel using the AUDIO button (under the cover). Each time AUDIO is pressed, the audio channels change as follows: AUDIO CD VIDEO CD 2 Press ' / " to select the subtitles you want to see. • You can select by pressing SUB- TITLE. • The display indicates the subtitle number currently being played back, and the subtitles appear. • To hide the subtitles, press \ / | a few times and select "OFF". You can also select "OFF" by pressing SUBTITLE or ' / " . Zoom You can magnify your favorite section by pressing ZOOM during playback. • Each time you press this button, the zoom setting cycles in the following sequence: ZOOM: 1 (approx. 1.2✕)→ZOOM: 2 (approx. 1.5✕)→ZOOM: 3 (approx. 2.0✕)→OFF (No display) • You can move the enlarged part with ZOOM: 1 L+R L R DVD VIDEO The sound number which is currently played back will be displayed. DVD-RW DVD-RW DVD-R VR MODE VIDEO MODE The sound you can select varies depending on the sound recorded on the disc. (page 99) • When recording SAP broadcast or stereo, the way audio channel changes may differ depending on the recorded sound. See the table of SAP on page 99 for details. NOTE • When you play a program recorded in dual mono, and if you are listening to the Dolby Digital sound via the digital output jack, you cannot select the audio channel. Set "DIGITAL AUDIO OUTPUT" to "PCM" (see page 102), or if you want to change the audio channel, listen via the analog output jacks. Switching Subtitles DVD VIDEO If subtitles are provided in multiple languages, you can switch between them. 1 Press SUBTITLE (under the cover) during playback. • The display indicates the subtitle number currently being played back, and the subtitles appear is displayed if a disc has no subtitles. Switching Angle DVD VIDEO If multiple angles are recorded, you can switch between them. Press ANGLE (under the cover) during playback. • The display indicates the angle number currently being played back. Each time you press this button, the angle switches. • The angle can also be switched by pressing is displayed if a disc is recorded with only one angle. 1 To return to the previous angle, press ANGLE (under the cover) a few times to select the original angle. NOTE • The following operations will not work when playing back an audio CD: Replay, Slow Playback, Frame Advance/ Reverse Display of functions • The display for subtitle, angle or audio automatically disappears after 10 seconds. The display can also be hidden by pressing SET/ENTER. Switching between functions • You can switch subtitle, angle and audio at the Function Control screen (page 75). • Operation for each function varies depending on the disc. See the manual for the disc. 72