Sharp DV-HR300U DV-HR300U Operation Manual - Page 82
Searching for the Start, Point and End Point Scenes
![]() |
View all Sharp DV-HR300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Editing an Original Title (HDD/DVD) 9 Press Red (B) (CONFIRMING) to confirm the contents. • The title is played back without the scene to be erased. Press Yellow (D) (ERASE) to erase. • Go to step 10. • Press RETURN to cancel scene erase. 10 Press \ to select "YES", then press SET/ENTER. EDIT(HDD ORIGINAL) TITLE: CH33 FINE 12 / 25 SAT 10 : 28 AM TITLE INFO: 10/4 MON 8:09 PM - 8:14 PM ERASE SCENE CHANGE TITLE NAME CHANGE THUMBNAIL ERASE THIS SCENE? DIVIDE CHAPTER YES NO SELECT ENTER ENTER n RETURN • Erase begins. When erase completes, the screen in step 5 appears. • If "C (UNDO)" is displayed, you can undo edit by pressing Green (C). • To quit scene erase, press RETURN. Then the edit screen appears. 11 Press EXIT to exit from Edit mode. NOTE Selecting start and end points for scene erase • You cannot set a range shorter than 3 seconds. • Once you erase a section of an original, it is completely erased. It cannot be restored, so be very careful and confirm before erasing. • Scenes can only be added and erased a maximum of 50 times per title. • If scenes have been added 51 or more times to a disc using another DVD recorder. Editing (Recording) may not function. Searching for the Start Point and End Point Scenes The following playback operations are available when searching for the start point and end point scenes. Playback • If you press |PLAY, the currently paused title will be played back. Skipping to the start of a chapter • If the scene to be selected is in another title or chapter, first search for the title or chapter using Kor L. Searching for scenes in a chapter • GREV and JFWD are convenient for searching for a scene in a chapter. Pause • When you reach a scene near the start point or end point, press FSTILL/PAUSE to pause. This will make it easier to find the scene. The start and end points may shift slightly. Frame Advance/Reverse • If you press Lafter pause, the video will start Frame Advance Playback. If you press K, it will start Frame Reverse Playback. Final selection of scene • To select a scene more accurately, use slow playback starting a little before the scene to be selected. This will keep you from going beyond the scene. If you press SLOW after pausing, you can select a scene at your leisure during slow playback of the video. 82
![](/manual_guide/products/sharp-dvhr300u-dvhr300u-operation-manual-cac2cfb/82.png)