Sharp DV-HR300U DV-HR300U Operation Manual - Page 97
Recording from a Camcorder, VCR Using an Analog, Connection
![]() |
View all Sharp DV-HR300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Recording from External Equipment Recording from a Camcorder (VCR) Using an Analog Connection HDD DVD-RW DVD-RW DVD-R VR MODE VIDEO MODE Material from a camcorder can be recorded with this Recorder using an analog connection. You can capture video by connecting a camcorder or VCR to the LINE IN 1, 2 or 3 jacks of this Recorder. NOTE • More vivid images can be viewed by connecting the S- VIDEO IN jack on this Recorder with the S-video Out jack on the camcorder using an S-video cable. • Some camcorders may be required to be connected using a special cable. • Refer to the operation manual provided with the camcorder for further information on the procedure for connecting the camcorder. • Material protected with a copy guard cannot be recorded. It may be impossible to get the correct video, even if you just view without recording. • Date and time as well as the contents of cassette memory cannot be recorded with this Recorder. • If you input video from an external equipment to this Recorder, there will be a slight difference in image quality between the video viewed from the external equipment directly on the TV, and video viewed as external input to the Recorder. Example: To record by connecting a camcorder to the LINE IN 3 jacks. The Recorder 1 Press HDD or DVD to select the media to record to. 2 Select audio to be input from the external equipment. To record to HDD • Switch audio of the external equipment to the audio you want to capture. To record to DVD • Select audio using "EXTERNAL AUDIO" (page 98). • Select "L CH" or "R CH" with "DUAL MONO REC. SET" (page 98) to record in Video mode. 3 Press INPUT to set the connection to exter- nal input channel (example: L3). • The setting will cycle as follows each time you press the button. L1 (IN 1) L2 (IN 2) TV channels DV (DV IN) L3 (IN 3) 4 Play back the camcorder or VCR. 5 Press ●REC when you reach the scene you want to start recording. • The Recorder starts recording. 6 Press REC PAUSE when you want to pause recording. • Press REC PAUSE again to cancel Pause mode. 7 Press REC STOP when you want to stop (end) recording. To S-VIDEO Input jack S-video cable (commercially available) To S-video output jack To VIDEO/AUDIO Input jacks Video/audio cable (provided with camcorder or commercially available) To video/audio output jack Camcorder 97
![](/manual_guide/products/sharp-dvhr300u-dvhr300u-operation-manual-cac2cfb/97.png)