Sharp DV-HR300U DV-HR300U Operation Manual - Page 87
Erasing All Titles, Erasing by Selecting a, Title or
![]() |
View all Sharp DV-HR300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Editing an Original Title (HDD/DVD) Erasing All Titles HDD DVD-RW DVD-RW DVD-R VR MODE VIDEO MODE This erases the entire contents of a HDD or DVD-RW. (Except titles for which title protect has been set.) You can erase the following: • HDD (ORIGINAL): Erases all titles recorded on the HDD. When originals are erased, play lists are also erased. • HDD (PLAY LIST): Erases all play lists created on the HDD. Even if play lists are erased, the original titles are not erased. • DVD (ORIGINAL): Erases all titles recorded on DVD. When originals are erased, play lists are also erased. • DVD (PLAY LIST): Erases all play lists created on DVD. Even if play lists are erased, the original titles are not erased. NOTE • When a Video mode disc is finalized, you can no longer erase all titles. Before Starting Editing • Switch to the drive (HDD or DVD) to be edited. 1 Select "EDIT/ERASE" in START MENU screen, then press SET/ ENTER. 2 Press ' / " to select "ERASE ALL TITLES", then press SET/ ENTER. 3 Press ' / " to select what you want to erase, then press SET/ ENTER. ERASE ALL TITLES 12 / 25 SAT 10 : 28 AM SELECT AN ITEM BELOW TO ERASE ALL TITLES HDD (ORIGINAL) HDD (PLAY LIST) 4 Press \ / | to select "YES", then press SET/ENTER. • Carefully confirm before executing erase. • If you select "NO" and enter, the screen in step 3 appears. 5 Press SET/ENTER. • All titles (or play lists) are erased, and the screen in step 3 appears. To restore the erased content, press Green (C) (CNL ERSE). Operate according to the instructions on the screen. (Note: You can only undo once, to the state immediately before the last erase.) 6 Press EXIT to exit from Edit mode. Erasing by Selecting a Title (or Chapter) HDD DVD-RW DVD-RW DVD-R VR MODE VIDEO MODE Allows you to select titles to erase, and erase them in a batch. • When erasing original titles: If original titles are erased, those titles will also be erased from play lists. • When erasing play lists: Even if play lists are erased, the original titles will not be erased. NOTE • Up to a maximum of 20 titles (chapters) can be selected at one time. • When a Video mode disc is finalized, you can no longer select and erase titles. • You cannot erase chapters in DVD-R/RW discs (Video mode). Before Starting Editing • Switch to the drive (HDD or DVD) to be edited. 1 Select "EDIT/ERASE" in START MENU screen, then press SET/ ENTER. 2 Press ' / " to select "ERASE TITLES", then press SET/ENTER. 3 Press to select titles to erase. • If you press Red (B) (CHAPTER), the screen will switch to the chapter thumbnail display so you can select and erase chapters. 4 Press SET/ENTER. • If there are other titles (chapters) you wish to erase, select with and press SET/ENTER. 5 Press Yellow (D) (ERASE). 6 Press \ / | to select "YES". • Once a title (chapter) has been erased, it cannot be restored. Carefully confirm before executing erase. • If you select "NO" and enter, operate from step 4 again. 7 Press SET/ENTER. • All selected titles (chapters) are erased. • To cancel erase, press Green (C) (CNL ERSE). • Operate according to the instructions on the screen. 8 Press EXIT to exit from Edit mode. NOTE • A title which is recorded as an overwrite program will always be shown at the end of the list. If there is more than one overwrite programs, they will be shown in the order of timer recording. Note that even if you select "SORT" in the title name list, the display order will not change. 87
![](/manual_guide/products/sharp-dvhr300u-dvhr300u-operation-manual-cac2cfb/87.png)