Sharp LD-26SH1U LD-26SH1U Operation Manual - Page 29

Setting TV channels The following table shows the channels this TV can receive. VHF Channels 2 through 13 UHF Channels 14 through 69 Channel 1 (HRC and IRC mode only) Cable Channels 2 through 125 (STD, HRC, and IRC) (You must subscribe to a cable TV service to receive cable channels.) Displaying the CHANNEL SETTING menu POWER PC TV Virtual AV HDMI/DVI FREEZE MULTI VIEW MODE SLEEP MENU TV memory for channels is empty at shipment. To receive channels, use the CHANNEL SETTING menu. BRIGHT MODE ENTER BRIGHT Note: - Release the adjustment lock (see page E64) if it has been set. You cannot use the CHANNEL SETTING menu while the adjustment lock is set. Channel setting methods There are two ways to set channels. Automatically setting channels you can receive (CHANNEL SEARCH) The TV will automatically set the channels it can receive in your area. Setting channels one at a time (CHANNEL MEMORY) This method is for manually setting the channels you want one by one. Use this method if you want to add other channels after using "CHANNEL SEARCH". 1. Press the POWER button on the TV to turn on the TV. When the power LED lights red, press the POWER button on the remote control. 2. Press the TV button to select TV mode. A channel number will appear in the upper-right corner of the screen. 3. Press the MENU button to display the MENU screen. MENU VIDEO ADJUST AUDIO ADJUST CHANNEL SETTING SCREEN ADJUST MODE SELECT CLOSED CAPTION V-CHIP BLOCK HDMI SETUP < TV/AV 4. Press the buttons to select "CHANNEL SETTING", and press the ENTER button. The CHANNEL SETTING menu will be displayed. CHANNEL SETTING < TV/AV> RETURN AIR/CABLE [ AIR ] CABLE MODE [ STD ] CHANNEL SEARCH >> CHANNEL MEMORY >> E28