Sharp LD-26SH1U LD-26SH1U Operation Manual - Page 30

English Français Deutsch Italiano Setting TV channels Selecting broadcast (AIR) or cable TV (CABLE) for channel setting Saving broadcast TV channels in the memory (CHANNEL SEARCH) It is necessary to set the receiving mode to "AIR" or "CABLE" channels to receive locally broadcast TV programs. 1. Display the CHANNEL SETTING menu. (See page E28.) 2. Press the buttons to select "AIR/CABLE", and press the ENTER button. 3. Press the buttons to select the desired mode ("AIR" or "CABLE"), and press the ENTER button. If you select "CABLE": (1) Press the buttons to select "CABLE MODE", and press the ENTER button. (2) Press the buttons to select the desired mode ("STD", "HRC", or "IRC"). 4. Press the MENU button to exit the screen. "CHANNEL SEARCH" allows you to search through available channels ("AIR" or "CABLE") in your area. The tuner saves them to TV memory automatically. 1. Display the CHANNEL SETTING menu. (See page E28.) 2. Press the buttons to select "CHANNEL SEARCH", and press the ENTER button. CHANNEL SEARCH AIR 2 < TV/AV> 3. Press the ENTER button. The tuner will search through all available channels in your area and save them to the TV memory. Note: - To interrupt Channel Search, press the MENU button. Channel Search will stop at the current channel and will not save any higher channels. 4. When Channel Search completes, the CHANNEL SEARCH screen becomes off and TV screen becomes minimum channel of TV memory. If TV memory is empty, TV channel will be CH 2 (AIR and CABLE: STD) or CH 1 (CABLE: HRC and IRC). Notes: - Searching channels are: AIR channels: VHF: 2 through 13 UHF: 14 through 69 CABLE channels: 1 (HRC and IRC mode only) 2 through 125 (STD, HRC, and IRC) - During Channel Search, the TV will change channels automatically. - When Channel Search completes, all channels, which were set previously, will be erased. - If you search for channels but cannot receive any, TV memory becomes empty. Español English E29