Sharp LD-26SH1U LD-26SH1U Operation Manual - Page 72

English Français Deutsch Italiano Specifications The analog RGB input connector pin (Mini D-sub connector with 15 pins) No. Function 1 Red video signal input 2 Green video signal input 3 Blue video signal input 4 N.C. 5 GND 6 For red video signal GND 7 For green video signal GND 8 For blue video signal GND 9 +5V 10 GND 11 N.C. 12 DDC data 13 For Hsync signal input 14 For Vsync signal input 15 DDC clock The DVI-D input connector pin (DVI-D connector with 24 pins) No. Function No. Function 1 TMDS data 2- 13 N.C. 2 TMDS data 2+ 14 +5V 3 TMDS data 2/4 shield 15 GND 4 N.C. 16 Hot plug detection 5 N.C. 17 TMDS data 0- 6 DDC clock 18 TMDS data 0+ 7 DDC data 19 TMDS data 0/5 shield 8 N.C. 20 N.C. 9 TMDS data 1- 21 N.C. 10 TMDS data 1+ 22 TMDS clock shield 11 TMDS data 1/3 shield 23 TMDS clock + 12 N.C. 24 TMDS clock - Power management The monitor is based on the VESA DPMS and the DVI DMPM standards. To activate the power management function, the video card and the computer used with it must also conform to these standard. DPMS: Display Power Management Signaling DPMS mode Screen Power consumption H-sync V-sync ON Display on 123 W Yes Yes STANDBY No Yes SUSPEND Display off 2.5 W Yes No OFF No No DMPM: Digital Monitor Power Management DMPM mode Screen Power consumption ON Display on 123 W OFF Display off 2.5 W DDC (Plug & Play) This monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for carrying out Plug & Play functions on the monitor or computer. It transfers information such as degree of resolution between the monitor and computer. You can use this function if your computer is DDC compliant and if it is set so that it can detect the Plug & Play monitor. There are many varieties of DDC due to the differences between systems. This monitor works with DDC2B. Español English E71