Sharp MX-C303W MX-C303W MX-C304W Troubleshooting Guide - Page 24
Sided Copying Does Not Take Place, Enlarge/reduce Does Not Work
View all Sharp MX-C303W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Copying Problems ? 2-SIDED COPYING DOES NOT TAKE PLACE Check ! Solution Does the paper type setting of the selected tray specify a type of paper that cannot be used for 2-sided copying? Are you using a special size or type of paper? Are you copying using settings that do not allow 2-sided copying? ■ Check "Paper Tray Settings" in the setting mode. "Settings" → [System Settings] → [Common Settings] → [Paper Settings] → [Paper Tray Settings] → [Tray Registration] → [Feeding Approved Job] Check the [Tray Settings] in the home screen. Tap the selected tray, and in the screen that appears, tap the [Paper Property] key. If the [Disable Duplex] checkbox in the paper properties screen is , the tray cannot be used for duplex printing. Change the paper type to a type that can be used for duplex printing. ■ For the paper types and sizes that can be used for two-sided copying, read "SPECIFICATIONS" in Start Guide. ■ 2-Sided Copy can generally be combined with other modes as required, however, some combinations are not possible. If a prohibited combination is selected, a message will appear in the touch panel. ? ENLARGE/REDUCE DOES NOT WORK Check Are the original, paper, and ratio settings correct? ! Solution ■ Check if the original size that appears on the screen is correct. After that, check if the correct paper is selected. Tap the [Ratio] key and then tap the [Auto Image] key. The appropriate ratio for the original and paper will appear. 24