Sharp MX-C303W MX-C303W MX-C304W Troubleshooting Guide - Page 33
The Image Is Too Light Or Too Dark, Colors Are Off
View all Sharp MX-C303W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Printing Problems ? THE IMAGE IS TOO LIGHT OR TOO DARK Check Is the overall print density too light? Does the image (particularly a photo) need correction? (Windows) ! Solution ■ Use the setting below to change the overall print density. Select "Settings (administrator)" - [System Settings] → [Image Quality Adjustment] → [Print Image Quality] → [Quick Image Quality Adjustment]. Set default setting [2] to [3 (Sharp)] to increase the overall density, or [1 (Smooth)] to decrease the overall density. This setting can be set separately for color mode and monochrome mode. ■ Check the settings of the printer driver. Correct brightness and contrast with [Image Quality] on the [Color Adjustment] tab of the printer driver. Use these settings to make simple corrections in a case such as when image editing software is not installed on your computer. ? COLORS ARE OFF Check Did you perform "Registration Adjustment"? ! Solution ■ Ask your administrator to perform "Registration Adjustment". "Settings (administrator)" → [System Settings] → [Image Quality Adjustment] → [Collective Adjustment] → [Registration Adjustment] . If the color tones are off, perform [Auto Color Calibration (for Print)] after finishing registration adjustment. (If the colors are still off after calibration, repeating calibration may improve the results.) "Settings (administrator)" → [System Settings] → [Image Quality Adjustment] → [Common Functions] → [Auto Color Calibration (for Print)] 33