Sharp MX-C303W MX-C303W MX-C304W Troubleshooting Guide - Page 25
The Image Is Too Light Or Too Dark
View all Sharp MX-C303W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Copying Problems ? THE IMAGE IS TOO LIGHT OR TOO DARK Check Is the image too light? Is the image too dark? Has an appropriate exposure mode for the original type been selected? Is the overall copy density too light? ! Solution ■ Select an appropriate exposure mode for the original being copied and adjust the exposure level manually. ■ Select one of the following modes depending on the original type. (This can be set in normal mode.) • Text Use this mode for regular text documents. • Text/Printed Photo This mode provides the best balance for copying an original which contains both text and printed photographs, such as a magazine or catalogue. • Text/Photo This mode provides the best balance for copying an original which contains both text and photographs, such as a text document with a photo pasted on. • Printed Photo This mode is best for copying printed photographs, such as photos in a magazine or catalogue. • Photo Use this mode to copy photos. • Map This mode is best for copying the light color shading and fine text found on most maps. • Light Original Use this mode for originals with light pencil writing. ■ Change the overall copy density with either method below. • Changing the default setting Select "Settings (administrator)" - [System Settings] → [Image Quality Adjustment] → [Copy Image Quality] → [Quick Image Quality Adjustment]. Set default setting [2] to [3 (Sharp)] to increase the overall density, or [1 (Smooth)] to decrease the overall density. • Temporarily changing the setting Select Normal Mode (the setting cannot be changed in Easy Mode). In [Others] → [Quick Image Quality Adjustment], set default setting [2] to [3 (Sharp)] to increase the overall density, or [1 (Smooth)] to decrease the overall density. The setting is automatically reset when you return to the home screen. 25