Sharp MX-C303W MX-C303W MX-C304W Troubleshooting Guide - Page 5
Placing the original and adding paper, General Problems
View all Sharp MX-C303W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
General Problems Placing the original and adding paper Is the original placed correctly? ●Document glass Place the original in the back left corner. If the original has a fold, straighten the fold before placing. (This prevents original misfeeds.) Mark Platen Scale ●Automatic Document Feeder If the original has a fold, straighten the fold before placing. (This Do not exceed the Align the edges and place face up prevents original misfeeds.) indicator line Insert all the way in Adjust to the original size Is the paper loaded correctly? ●Paper tray If the original is stapled, be sure to remove the staples and fan the pages well before placing. (This is to prevent misfeeding and tearing of the original, and to prevent torn fragments of the original from remaining in the feeder.) Fan the paper well before loading it. Set the guides to the size of the paper. The paper must not exceed the maximum number of sheets and must not be higher than the indicator line. Tray 1 Guide plate for the A6 paper Tray 2 to 5 ●Bypass tray When loading paper, also open the extension tray. Push the center of the pressure plate down until it locks into place. Load the paper with the print side facing down. When setting an A6 paper in tray 1, raise the guide plate for the A6 paper that is present on the paper platen. When setting paper with width 8-1/2" x 11" size, remove the 2 regulation plates (A) with green color on the front and back side of the tray before setting the paper. The plates are contained in the inside storage space (B) of the back side of the tray. Adjust the bypass tray guides so that they slightly contact the loaded paper. The paper must not exceed the maximum number of sheets and must not be higher than the indicator line. 5