Sony CAV-M1000ES Installation Manual Integrated A/V System - Page 15
Setting up the Main Unit, Installing the Main Unit
![]() |
View all Sony CAV-M1000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setting up the Main Unit Chapter 2 Setting up the Main Unit This chapter provides you with information on the Main Unit regarding installation, hookups and settings. Installing the Main Unit When you mount the Main Unit, note the following: • Place the Main Unit on a flat and level surface. • When installing it in a cabinet, make sure the back of the cabinet is open to allow adequate ventilation, prevent heat buildup, and prolong the life of the unit. • Place a board under the Main Unit if it is located on a carpet to allow adequate ventilation on the bottom. • Make sure the weight is equally distributed on each of its four feet. • Do not place anything on the top of the Main Unit that might block the ventilation holes and cause malfunction. • Do not place anything on the front or rear panel that might damage the Main Unit's control buttons and connectors. • Use caution when placing the unit or speakers on surfaces that have been specially treated (with wax, oil, polish, etc.) as staining or discoloration of the surface may result. 7 inches (177.8 mm) minimum 2 inches (50.8 mm) minimum Leave at least 3 inches (76.2 mm) on each side for ventilation. 15US
![](/manual_guide/products/sony-cavm1000es-installation-manual-integrated-av-e4e84ee/15.png)