Sony CAV-M1000ES Installation Manual Integrated A/V System - Page 29
Customizing the Keypad, adjust the LCD Contrast Value.
View all Sony CAV-M1000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setting up the Keypad Customizing the Keypad Setting bass and treble You can adjust bass and treble to optimize the acoustic conditions in each zone. 1 Turn off the power. 2 Press and hold MUTING and PAGE simultaneously, and then press POWER. The LCD panel changes to the Bass and Treble setup mode. 3 Press the corresponding SELECTION button to adjust the bass and the treble. 4 Turn off the power when you have finished. The settings are confirmed when the power is turned off. Adjusting LCD contrast 1 Turn off the power. 2 Press and hold PLAY and the SELECT button in the left-upper simultaneously, and then press POWER. The display window enters the contrast setting mode. 3 Press the corresponding SELECTION buttons to adjust the LCD Contrast Value. 4 Turn off the power when you have finished. The settings are confirmed when the power is turned off. SELECT button Notes • All other buttons, other than VOLUME +, VOLUME -, MUTING and POWER, are disabled while you are making settings. • You can adjust Bass and Treble between ± 14 dB in 2 dB step. Setting volume limits You can customize the volume limits to protect speakers from being over driven. 1 Turn off the power. 2 Press SOURCE and LOCK simultaneously, and then press POWER. The LCD panel changes to the Volume limitation mode. 3 Press the corresponding SELECTION button to adjust the maximum volume. 4 Turn off the power when you have finished. The settings are confirmed when the power is turned off. Notes • All buttons other than POWER are disabled while settings are being made. • You can adjust the LCD contrast between level 01 and level 32. Adjusting brightness You can make only a minor adjustment. Set the brightness of the display window to the adequate brightness level by inserting a flathead screwdriver into the bright adjustment hole. See page 11 for the location of the brightness adjustment hole. Turning all the zones off from the Keypad 1 Press and hold POWER until the figure below appears in the display window. 2 Press YES to turn off all of the zones. Press No to cancel the operation. All the zones turn off and the display window turns off automatically. Notes • All other buttons, other than VOLUME +, VOLUME -, MUTING, and POWER, are disabled while you are making settings. • You can adjust the volume limits between level 64 and level 74. 29US