Sony CAV-M1000ES Installation Manual Integrated A/V System - Page 26
Setting up the Keypad, Installing the Keypad
View all Sony CAV-M1000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 3 Setting up the Keypad This chapter provides you with information regarding installation, hookup and settings for the optional Keypad. Installing the Keypad A Keypad must be installed in a junction box (not supplied). Follow the procedures below to mount a Keypad mounting bracket and a Keypad on the wall. Installing the Keypad 1 Place the Keypad mounting bracket over a junction box which has already been installed on the wall with the mounting lips facing out. 2 Attach the Keypad mounting bracket to the junction box with the supplied screws at the four points as shown below. Proceed to the steps in "Zone related cables hookups" on page 18 before mounting the Keypad. Note The Keypad mounting bracket may not fit easily over some junction boxes. In this case, loosen the screws and move the Keypad mounting bracket left to right to center on the junction box. 26US