Sony CAV-M1000ES Installation Manual Integrated A/V System - Page 30
Testing the Components, Select SOURCE 1 by pressing the SELECT SOURCE
View all Sony CAV-M1000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Testing the Components It is recommended that you test all the components before you finish with the installation of the entire system in each zone so as not to encounter any problems after the installation is completed. Check to see if the Main Unit, the installed components, and the Keypad operate properly by testing each operation. 1 Check the following connections. - All the Keypads are connected to the Main Unit via CAT5 cables. - An audio or a video component is connected between AUDIO IN Left/Right and VIDEO IN of each SOURCE connection jack. - A display (output component) is connected to VIDEO OUT at each ZONE connection jack. - Speakers are connected to SPEAKERS at each ZONE connection jack. - An IR emitter is connected to IR OUT of each SOURCE connection jack, and is placed near the IR sensor of the source component. - AC power cords for the Main Unit and the other components are plugged in. 2 Turn on the Main Unit. 3 Select ZONE 1 by pressing the ZONE button on the front panel of the Main Unit. 4 Select SOURCE 1 by pressing the SELECT SOURCE button on the front panel of the Main Unit. 5 Turn on the Keypad in zone 1. 6 Select SOURCE 1 by pressing the SELECT button on the Keypad. Then, check the following. - Power control Press POWER to turn the Keypad on or off. - Volume adjustment Press VOLUME +/- to adjust the volume. - Muting Press MUTING to mute the speaker output. - Playback operation Press the Play, Stop, Pause, and ./> buttons on the Keypad to confirm that the source component operates properly. - Remote control operation Check that the remote control of the SOURCE 1 component works by pressing any command button while pointing the Remote Control toward the IR sensor of the Keypad. Then check that the SOURCE 1 component operates properly using the remote control. 7 Perform the test in each zone from zone 1 through zone 6 by repeating Steps 3 to 6. ANTENNA IR OUT IR OUT IR OUT IR OUT IR OUT IR OUT IR OUT IR OUT IR OUT COMMON 12V TRIGGER VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT L L L L L L L L CONTROL A1 II R R R R R R R R SOURCE 1 SOURCE 2 SOURCE 3 SOURCE 4 SOURCE 5 SOURCE 6 SOURCE 7 SOURCE 8 123 456 STR KEYPAD R L KEYPAD R L KEYPAD R L KEYPAD R L KEYPAD R L KEYPAD R L FIXED PRE OUT R VIDEO OUT L FIXED PRE OUT R VIDEO OUT L FIXED PRE OUT R VIDEO OUT L FIXED PRE OUT R VIDEO OUT L VARIABLE PRE OUT R VIDEO OUT L VARIABLE PRE OUT R VIDEO OUT L SPEAKERS (CLASS 2 WIRING) ZONE 1 SPEAKERS (CLASS 2 WIRING) ZONE 2 SPEAKERS (CLASS 2 WIRING) ZONE 3 SPEAKERS (CLASS 2 WIRING) ZONE 4 SPEAKERS (CLASS 2 WIRING) ZONE 5 SPEAKERS (CLASS 2 WIRING) ZONE 6 DVP AUX RS232C SPEAKERS IMPEDANCE USE 4- 16 ~AC IN Setting up the Keypad IR emitter DVD player 30US TO SPEAKERS FROM AMPLIFIER R L R L OUT IN IR IN MODE SUB MAIN Keypad SP TV SP