Sony DCR-HC62 Operating Guide - Page 12
Step 2: Charging the battery pack - power cord
UPC - 027242727397
View all Sony DCR-HC62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Step 2: Charging the battery pack 1 2 2 1 Battery pack 3 DC plug DC IN jack 4 To the wall outlet (wall socket) AC Adaptor Power cord (Mains lead) POWER switch You can charge the "InfoLITHIUM" battery pack (H series) (p. 81) after attaching it to your camcorder. b Notes • You cannot attach any "InfoLITHIUM" battery pack other than the H series to your camcorder. 4 Connect the power cord (mains lead) to the AC Adaptor and the wall outlet (wall socket). 1 Align the terminals of the battery pack and your camcorder 1, then attach the battery pack and click it into place 2. 2 Slide the POWER switch in the direction of the arrow to OFF(CHG) (The default setting). 3 With the v mark on the DC plug facing down, connect the AC Adaptor to the DC IN jack on your camcorder. CHG (charge) lamp The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack. b Notes • Disconnect the AC Adaptor from the DC IN jack holding both the camcorder and the DC plug. 12