Sony DCR-HC62 Operating Guide - Page 41

Self-timer, Digital Zoom, Steadyshot

Page 41 highlights

SELF-TIMER When you set [SELF-TIMER] to [ON] ( ), the self-timer starts recording in about 10 seconds after pressing PHOTO to record still images. To cancel the count down, touch [RESET]. To cancel [SELF-TIMER], touch [OFF]. z Tips • You can also set the self-timer with the PHOTO button of the Remote Commander (p. 93). DIGITAL ZOOM You can select the maximum zoom level in case you want to zoom to a level greater than 25 × (the default setting) while recording on a tape. Note that the image quality decreases when you are using the digital zoom. STEADYSHOT You can compensate for camera shake (the default setting is [ON]). Set [STEADYSHOT] to [OFF] ( ) when using a tripod (optional) or the conversion lens (optional), then the image becomes natural. Using the Menu The right side of the bar shows the digital zooming factor. The zooming zone appears when you select the zooming level. B OFF Up to 25 × zoom is performed optically. 50 × Up to 25 × zoom is performed optically, and after that, up to 50 × zoom is performed digitally. 2000 × Up to 25 × zoom is performed optically, and after that, up to 2,000 × zoom is performed digitally. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

41
Using the Menu
When you set [SELF-TIMER] to [ON]
(
), the self-timer starts recording in about
10 seconds after pressing PHOTO to record
still images.
To cancel the count down, touch [RESET].
To cancel [SELF-TIMER], touch [OFF].
z
Tips
You can also set the self-timer with the PHOTO
button of the Remote Commander (p. 93).
You can select the maximum zoom level in
case you want to zoom to a level greater
than 25 × (the default setting) while
recording on a tape. Note that the image
quality decreases when you are using the
digital zoom.
B
OFF
Up to 25 × zoom is performed optically.
50 ×
Up to 25 × zoom is performed optically,
and after that, up to 50 × zoom is
performed digitally.
2000 ×
Up to 25 × zoom is performed optically,
and after that, up to 2,000 × zoom is
performed digitally.
You can compensate for camera shake (the
default setting is [ON]).
Set [STEADYSHOT] to [OFF] (
) when
using a tripod (optional) or the conversion
lens (optional), then the image becomes
natural.
SELF-TIMER
DIGITAL ZOOM
The right side of the bar shows the digital
zooming factor. The zooming zone
appears when you select the zooming
level.
STEADYSHOT