Sony DEV-50 Digital Recording Binoculars Handbook - Page 82
When not using this product for a long, Moisture condensation, On handling the casing
View all Sony DEV-50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Table of Contents Menu Lists Near windows or outdoors, where the viewfinder, or the lens may be exposed to direct sunlight. This damages the screen. For DC or AC operation, use the accessories recommended in these operating instructions. Do not let this product get wet, for example, from rain or sea water. If this product gets wet, it may malfunction. Sometimes this malfunction cannot be repaired. If any solid object or liquid gets inside the casing, unplug this product and have it checked by a Sony dealer before operating it any further. Avoid rough handling, disassembling, modifying, physical shock, or impact such as hammering, dropping or stepping on the product. Be particularly careful of the lens. Turn the power off when you are not using this product. Do not wrap this product with a towel, for example, and operate it. Doing so might cause heat to build up inside. When disconnecting the power cord (mains lead), pull it by the plug and not the cord. Do not damage the power cord (mains lead) such as by placing anything heavy on it. Do not use a deformed or damaged battery pack. Keep metal contacts clean. If the battery electrolytic liquid has leaked: Consult your local authorized Sony service facility. Wash off any liquid that may have contacted your skin. If any liquid gets in your eyes, wash with plenty of water and consult a doctor. When not using this product for a long time To keep this product in optimum state for a long time, turn it on and let it run by recording and playing back images about once a month. Use up the battery pack completely before storing it. Moisture condensation If this product is brought directly from a cold place to a warm place, moisture may condense inside this product. This may cause a malfunction to this product. If moisture condensation has occurred Leave this product for about 1 hour without turning it on. Note on moisture condensation Moisture may condense when you bring this product from a cold place into a warm place (or vice versa) or when you use this product in a humid place as follows: You bring this product from a ski slope into a place warmed up by a heating device. You bring this product from an air conditioned car or room into a hot place outside. You use this product after a squall or a shower. You use this product in a hot and humid place. How to prevent moisture condensation When you bring this product from a cold place into a warm place, put this product in a plastic bag and seal it tightly. Remove the bag when the air temperature inside the plastic bag has reached the surrounding temperature (after about 1 hour). On handling the casing If the casing is soiled, clean this product body with a soft cloth lightly moistened with water, and then wipe the casing with a dry soft cloth. Avoid the following to avoid damage to the finish: Using chemicals such as thinner, benzine, alcohol, chemical cloths, repellent, insecticide and sunscreen Handling this product with above substances on your hands Leaving the casing in contact with rubber or vinyl objects for a long period of time Index GB 82