Sony DSC-RX10M2 Help Guide (Printable PDF) - Page 156

Note During [Bright Monitoring], [Live View Display] will automatically switch to [Setting Effect OFF], and setting values such as exposure compensation will not be reflected in the live view display. It is recommended that you use [Bright Monitoring] only in dark locations. [Bright Monitoring] will be automatically cancelled in the following situations. When the camera is turned off. When the mode dial is turned. When the focus mode is set to other than manual focus. When [ MF Assist] is set to [On]. When [Focus Magnifier] is selected. During [Bright Monitoring], the shutter speed may be slower than normal while shooting in dark locations. [154] How to Use Using shooting functions Setting the other functions of this product FINDER/MONITOR Sets the method for switching the display between Electronic Viewfinder and the screen. 1. MENU → (Custom Settings) → [FINDER/MONITOR] → desired setting. Menu item details Auto: When you look into the Electronic Viewfinder, the display is switched to the Electronic Viewfinder automatically. Viewfinder(Manual): The screen is turned off and the image is displayed only in the Electronic Viewfinder. Monitor(Manual): The Electronic Viewfinder is turned off and the image is always displayed on the screen. Hint You can assign the [FINDER/MONITOR] function to your preferred key. MENU → (Custom Settings) → [Custom Key Settings] → set [Finder/Monitor Sel.] to the preferred key. To turn off automatic switching of the display using the eye sensor, set [FINDER/MONITOR] to [Viewfinder(Manual)] or [Monitor(Manual)].