Sony DSC-RX10M2 Help Guide (Printable PDF) - Page 179
Menu item details, How to set the time code TC Preset, How to reset the time code
View all Sony DSC-RX10M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
The time code (TC) and the user bit (UB) information can be recorded as data attached to movies. 1. MENU → (Setup) → [TC/UB Settings] → setting value you want to change. Menu item details TC/UB Disp. Setting: Sets the display for the counter, time code, and user bit. TC Preset: Sets the time code. UB Preset: Sets the user bit. TC Format: Sets the recording method for the time code. TC Run: Sets the count up format for the time code. TC Make: Sets the recording format for the time code on the recording medium. UB Time Rec: Sets whether or not to record the time as a user bit. How to set the time code (TC Preset) 1. MENU → (Setup) → [TC/UB Settings] → [TC Preset], then press of the control wheel. 2. Turn the control wheel and select the first two digits. in the center The time code can be set between the following range. When [60i] is selected: 00:00:00:00 to 23:59:59:29 *When [24p] is selected, you can select the last two digits of the time code in multiples of four from 0 to 23 frames. When [50i] is selected: 00:00:00:00 to 23:59:59:24 3. Set the other digits following the same procedure as in step 2, then press center of the control wheel. in the How to reset the time code 1. MENU → (Setup) → [TC/UB Settings] →[TC Preset], then press of the control wheel. 2. Press the (Delete) button to reset the time code (00:00:00:00). in the center