Sony DSC-RX10M2 Help Guide (Printable PDF) - Page 229

media into the product without an M2 Adaptor as large as Duo size, you might not be able to remove it from the product. To use a microSD memory card with this product, be sure to insert the microSD memory card into a dedicated adaptor. When inserting a memory card into a memory card adaptor, be sure that the memory card is inserted in the correct direction and then insert it as far as it will go. If the card is not inserted properly, it may result in a malfunction. [263] How to Use Precautions/This product Cleaning this product On cleaning Cleaning the lens and flash Wipe the lens and flash with a soft cloth to remove fingerprints, dust, etc. Cleaning the lens Do not use a cleaning solution containing organic solvents, such as thinner, or benzine. When cleaning the lens surface, remove dust with a commercially available blower. In case of dust that sticks to the surface, wipe it off with a soft cloth or tissue paper slightly moistened with lens cleaning solution. Wipe in a spiral pattern from the center to the outside. Do not spray lens cleaning solution directly onto the lens surface. Cleaning the flash Clean the flash surface before use. The heat of the flash emission may cause dirt on the flash surface to start smoking or burning. Wipe the flash surface with a soft cloth to remove dirt or dust, etc. Cleaning the product surface Clean the product surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. To prevent damage to the finish or casing: Do not expose the product to chemical products such as thinner, benzine, alcohol, disposable cloths, insect repellent, sunscreen or insecticide. Do not touch the product with any of the above on your hand. Do not leave the product in contact with rubber or vinyl for a long time. Cleaning the monitor If oil from your hand or hand cream, etc., remain on the monitor, the original coating may become easily removable. Wipe oil or hand cream off as soon as possible.