Sony DSC-RX10M2 Help Guide (Printable PDF) - Page 64
Manual Exposure
View all Sony DSC-RX10M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Smaller F-value (opening the aperture) narrows the range that is in focus. This allows you to put the subject in sharp focus and blur objects in front of and beyond the subject (depth of field becomes shallower). Larger F-value (narrowing down the aperture) widens the range that is in focus. This allows you to shoot the depth of the scenery (depth of field becomes deeper). You can change the click texture of the aperture ring using the Aperture Click Switch. When shooting still images, set the Aperture Click Switch to "ON," and for movies, set it to "OFF." [38] How to Use Shooting Selecting a shooting mode Manual Exposure You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture. The shutter speed and the aperture value can be changed while recording movies. 1. Set the mode dial to M (Manual Exposure). 2. Select the desired aperture value by turning the aperture ring. Select the desired shutter speed by turning the control dial. When [ISO] is set to other than [ISO AUTO], use MM (Metered Manual) to check the exposure value. Toward +: Images become brighter. Toward -: Images become darker. 0: Appropriate exposure analyzed by the product 3. Adjust the focus and shoot the subject. Note When [ISO] is set to [ISO AUTO], the ISO value automatically changes to achieve the appropriate exposure using the aperture value and shutter speed you have set. If the aperture value and shutter speed you have set are not suitable for appropriate exposure, the ISO value indicator will blink. The Metered Manual indicator does not appear when [ISO] is set to [ISO AUTO]. When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes. The SteadyShot warning indicator does not appear in manual exposure mode. The brightness of the image on the monitor may differ from the actual image being shot. You cannot select [Auto] under [ND Filter]. Hint