Sony DSC-RX10M2 Help Guide (Printable PDF) - Page 198
One-touch connection with an NFC-enabled Android, smartphone NFC One-touch remote
View all Sony DSC-RX10M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
shutter button (A) on the smartphone to shoot an image. Use button (B) to change settings such as [EV], [Self-Timer] and [Review Check]. Note When you record movies using a smartphone as a remote controller, the monitor of the product becomes darker. Also, you cannot use the viewfinder for still image/movie recording. This product shares the connection information for [Smart Remote Embedded] with a device that has permission to connect. If you want to change the device that is permitted to connect to the product, reset the connection information by following these steps. MENU → (Wireless) → [SSID/PW Reset]. After resetting the connection information, you must register the smartphone again. Depending on future version upgrades, the operational procedures or screen displays are subject to change without notice. [220] How to Use Using Wi-Fi functions Controlling this product using a Smartphone One-touch connection with an NFC-enabled Android smartphone (NFC One-touch remote) You can connect this product and an NFC-enabled Android smartphone with one touch, without performing a complex setup operation. 1. Activate the NFC function of the smartphone. 2. Switch this product to shooting mode. The NFC function is available only when the screen. (N mark) is displayed on the 3. Touch the product to the smartphone.