Sony DSC-RX10M2 Help Guide (Printable PDF) - Page 36
Charging by connecting to a computer
View all Sony DSC-RX10M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
camera and then re-insert it to recharge. Do not continuously or repeatedly charge the battery pack without using it if it is already fully charged or close to fully charged. Doing so may cause a deterioration in battery performance. When charging is finished, disconnect the AC Adaptor from the wall outlet (wall socket). Be sure to use only genuine Sony brand battery packs, micro USB cables (supplied) and AC Adaptors (supplied). [11] How to Use Preparing the camera Charging the battery pack Charging by connecting to a computer The battery pack can be charged by connecting the camera to a computer using a micro USB cable. 1. Turn off the product, and connect to the USB terminal of the computer. Note Note the following points when charging via a computer: If the product is connected to a laptop computer that is not connected to a power source, the laptop battery level decreases. Do not leave the product connected to a laptop computer for an extended period of time. Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB connection has been established between the computer and the camera. Doing so may cause a malfunction. Before turning on/off or restarting the computer, or waking the computer from sleep mode, disconnect the camera from the computer. Proper operation cannot be guaranteed on all types of computers. Charging cannot be guaranteed with a custom-built computer, modified computer, or a computer connected through a USB hub. The camera may not operate correctly when other USB devices are used at the same time.