Sony DSC T1 Operating Instructions - Page 90
Set [Digital Zoom] to [Smart] or [Precision] s 44 and 106.
UPC - 027242629608
View all Sony DSC T1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Symptom Cause Solution The LCD screen turns blue and the subject does not appear when recording movies. • The image size is set to [640(Fine)] while an A/ V connecting cable is connected to the A/V OUT (MONO) jack. p Disconnect the A/V connecting cable. p Set the image size to other than [640(Fine)]. The image is out of focus. • The subject is too close. • When shooting still images, (Camera) in the menu is set to (Magnifying glass mode), (Twilight mode), (Landscape mode) or (Fireworks mode). • The focus preset function is selected. p Use close-up (Macro) function and set the lens position father away from the subject than the shortest shooting distance (page 27). Or, set (Camera) in the menu to (Magnifying glass mode) and focus within the range of 1 cm to 20 cm (13/32 inch to 7 7/8 inches) from the subject (page 32). p Set it to other settings (page 32). p Cancel the function (page 49). Zoom does not function. • You cannot change the zoom scale when - shooting movies. Optical zoom does not function. • When shooting still images, (Camera) in the p Set it to other settings (page 32). menu is set to (Magnifying glass mode). Digital zoom does not function. • [Digital Zoom] is set to [Off] on the Setup screen. • The image size is set to [5M] or [3:2] (only when using the smart zoom). • You are shooting in Multi Burst mode (only when using the smart zoom). p Set [Digital Zoom] to [Smart] or [Precision] (pages 44 and 106). p Set image size to other settings except [5M] and [3:2] (page 20). p Set [Digital Zoom] to [Precision] (pages 44 and 106). The image is too dark. • You are shooting a subject with a light source behind the subject. • The brightness of the LCD screen is too low. • The LCD backlight is turned off. p Adjust the exposure (page 50). p Adjust the brightness of the LCD screen (pages 44 and 107). p Turn on the LCD backlight with (page 25). The image is too bright. • You are shooting a spotlighted subject in a dark p Adjust the exposure (page 50). location such as on a stage. • The brightness of the LCD screen is too bright. p Adjust the brightness of the LCD screen (pages 44 and 107). Vertical streaks appear when you are shooting a very bright subject. 90 • The smear phenomenon is occurring. p This is not a malfunction.