Sony DSC V1 Operating Instructions - Page 57
NightFraming - night shot
UPC - 027242621459
View all Sony DSC V1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
• While using the NightShot function, you cannot use the following functions: - Focus Preset - LCD screen off - AE LOCK - Shooting with hologram AF - Shooting with the flash • While using the NightShot function: - The white balance is set to Auto. - The metering mode is set to center weighted. - If you perform any invalid operation, the indicator flashes, and the "Night shot" indicator lights for about five seconds. However, if you press v ( ) in Exposure Bracket, Multi Burst or Burst 3 mode, the BRK/ / indicator flashes. • Do not use the NightShot function in bright places (e.g. outdoors in the daytime). This may cause your camera to malfunction. • Images shot using the NightShot function are recorded with a green tint as if viewing an LCD screen. NightFraming The NightFraming function enables you to check a subject even at night and then record with natural colors using the flash. a Set the mode dial to , P or (Clip Motion). b Set NIGHTSHOT/ NIGHTFRAMING lever to NIGHTFRAMING. The and "Night framing" indicators light. The "Night framing" indicator turns off after about 5 seconds. 60min VGA 101 98 S AF "Night framing" c Press and hold the shutter button halfway down. When [Hologram AF] is set to [Off], you may not get a clear focus. Setting [Hologram AF] to [Auto] is recommended. d Press the shutter button fully down. The shutter sounds, the flash strobes and the image is recorded. To cancel the NightFraming function Set NIGHTSHOT/NIGHTFRAMING lever to z. • While using the NightFraming function, you cannot use the following functions: - LCD screen off - AE LOCK - Focus Preset • While using the NightFraming function: - The white balance is set to Auto. - The metering mode is set to multi-pattern metering. - The AF range finder is fixed to the center. - If you perform any invalid operation while using the NightFraming function, the indicator flashes and the "Night framing" indicator lights for about five seconds. • When you press the shutter button halfway down you will hear a sound, but this is not the sound of the shutter releasing. The image is not recorded yet. • The flash does not function when recording in Burst 3 and in Exposure Bracket modes. If you press v ( ) the BRK/ indicator flashes. Advanced still image shooting 57