Sony DSC V1 Operating Instructions - Page 99

Symptom Zoom does not work. Smart zoom does not function. The image is too dark. The image is too bright. Vertical streaks appear when you are shooting a very bright subject. Noise appears in the image when you view the LCD screen in a dark place. Cause Solution • The zoom magnification cannot be changed - while shooting movies (MPEG Movie). • You cannot use the zoom while a wide end - conversion lens is mounted. • You cannot use smart zoom while shooting movies (MPEG Movie). • [Smart Zoom] is set to [Off] in the SET UP settings. • The LCD screen is turned off. • The image size is set to [5.0M] or [4.5M(3:2)]. - p Set [Smart Zoom] to [On] (pages 39 and 115). p Turn on the LCD screen (page 28). p Set image size to other settings except [5.0M] and [4.5M(3:2)] (page 18). • You are shooting a subject with a light source behind the subject. • The brightness of the LCD screen is too low. p Adjust the exposure (page 49). p Adjust the brightness of the LCD screen (pages 39 and 117). • You are shooting a spotlighted subject in a dark p Adjust the exposure (page 49). location such as on a stage. • The brightness of the LCD screen is too bright. p Adjust the brightness of the LCD screen (pages 39 and 117). • The smear phenomenon is occurring. p This is not a malfunction. • The camera is functioning to increase the visibility of the LCD screen by temporarily brightening the image under conditions of low illumination. p There is no effect on the recorded image. Troubleshooting 99