Sony DSC V1 Operating Instructions - Page 66
Using the Sony flash (not supplied), Using a commercially available external flash, A, M or SCN.
UPC - 027242621459
View all Sony DSC V1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
• The flash does not strobe when shooting in Burst 3, Exposure Bracket, Twilight, MPEG Movie or Multi Burst mode. • You cannot have an external flash and the builtin flash strobe at the same time. • Note that when shooting with two or more external flashes, the camera functions may not operate normally, or the camera may malfunction. • You can carry out this operation even when the mode dial is set to (Clip Motion). • If the white balance cannot be adjusted when shooting with an external flash, set the flash mode to (Forced flash) or SL (Slow synchro), and set the one-push white balance mode (page 55). Using the Sony flash (not supplied) You can mount the Sony HVL-F32X or HVL-F1000 flash on the advanced accessory shoe of your camera. The HVLF32X is also equipped with automatic flash level adjustment and AF fill light shooting functions. a Mount the external flash on the advanced accessory shoe. b Plug the flash into the ACC jack. When using the HVL-F32X, you do not need to perform step 2. c Turn on the external flash. d Set the mode dial to , P, S, A, M or SCN. e Shoot the image. • When using a Sony optional external flash, check that [Hot Shoe] is set to [Off] in the SET UP settings (page 116). Using a commercially available external flash You can mount a commercially available external flash that supports advanced accessory shoe. a Mount the external flash to the advanced accessory shoe. b Set the mode dial to SET UP. c Select (Camera 2) with v/V, 2 [Hot Shoe] with B/v/V, [On] with B/v, then press z. d Turn on the external flash. e Set the mode dial to M or A. The flash also strobes when the mode dial is set to , P, S, SCN or (Clip Motion), but we recommend recording with the mode dial set to M or A. f Shoot the image. 66