Sony KLHW32 Operating Instructions - Page 41

Optional Adaptors The connectors marked with 4 on the side panel are slot-in type and can be installed with any of the optional adaptors (not supplied). For details on installation, consult your Sony dealers. VIDEO INPUT Adaptor BKM-FW10 RGB/COMPONENT ACTIVE THROUGH Adaptor BKM-FW12 1 IN 2 RGB/COMPONENT ACTIVE THROUGH OUT S VIDEO IN AUDIO VIDEO INPUT ADAPTOR OUT 1 S VIDEO IN (Mini DIN 4-pin): Connects to the S Video signal output of a piece of video equipment. 2 S VIDEO OUT (Mini DIN 4-pin): Connects to the S Video signal input of a piece of video equipment. 3 VIDEO IN (BNC): Connects to the video signal output of a piece of video equipment. 4 VIDEO OUT (BNC): Connects to the video signal input of a piece of video equipment. 5 AUDIO IN L/R (Pin jack): Connects to the audio output of a piece of video equipment. R L OUT IN AUDIO IN VIDEO IN 3 1 RGB/COMPONENT IN (D-sub 15-pin): Connects to the component signal output or analog RGB signal output of a piece of video equipment or PC. For details on inputting a component signal to the connector, see Pin assignment on page 29 . Note When inputting a component signal, be sure not to input sync signals to pins 13 and 14. If you do so, the picture may not be displayed properly. 2 RGB/COMPONENT OUT (D-sub 15-pin): Connects to the component signal input or analog RGB signal input of a piece of video equipment or PC. 3 AUDIO IN (Stereo mini jack): Inputs an audio signal. Connects to the audio signal output of a piece of video equipment or PC. Note When the display is not connected to an AC power or is in the standby mode, no signal is output from the RGB/ COMPONENT OUT. GB For details on the optional adaptors for system expansion, BKM-FW series, see each instruction manual. 9 GB