Home » Sony Manuals » Webcams » Sony SNC-RZ25N » Manual Viewer

Sony SNC-RZ25N User Guide - Page 21

Sony SNC-RZ25N - Network Camera Manual

UPC - 027242662575

Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

PanTilt control Click the arrow button of the direction in which you want to move the camera. Keep it pressed to move the camera continuously. To return to the home position, click button. Zoom control Press to zoom out, and press to zoom in. Zooming continues while the button remains pressed. Focus control To focus on a nearby object, press . To focus on a distance object, press . By pressing , the focus is set to the optimum position. Note Volume (Displayed when the Microphone (page 38) is set to On.) Drag the bar of icon to adjust the volume. When you click icon, the icon changes to and the audio output stops. To output the audio, click again. Note To control the focus manually, set "Focus mode" of the Camera setting menu to Manual. (page 38) If does not appear when the Java applet viewer is used, Audio codec may not be set to G.711 (64 kbps) (page 38), or Java may not be installed correctly. To check if Java is installed correctly, refer to "Java applet viewer" of "About Viewers" on page 18. Operating the Camera Trigger Monitor Image (Displayed only when the camera Viewer mode (page 47) is set to Full and one or more triggers are enabled in the Trigger menu (page 60).) Select the function you want to use from the drop-down list and click . The selected function is activated. The selectable functions are as follows: - send the still image files attached to an e-mail (page 27) - send the still image files to an FTP server (page 27) - record the still image files in the built-in memory, on a CF memory card (not supplied) (page 27) - switch the alarm output on/off (page 28) - switch the Day/Night function on/off (page 28) The image shot by the camera is shown here. Date and time is displayed at the top of the window. Transmission (Switching the TCP/ UDP transmission mode) (Displayed only when the camera Video mode (page 36) is set to MPEG4 and using the ActiveX viewer.) Each click switches the transmission mode of the video/ audio data among TCP mode, UDP (Unicast) mode and UDP (Multicast) mode. (page 29) The last selected mode is saved in the computer, and will stay selected for the next starting. Configuration of Main Viewer 21

Section	Page
Table of Contents	2
Overview	4
Features	4
Phenomena Specific to CCD Image Sensors	5
How to Use This User’s Guide	6
System Requirements	6
Preparation	7
Assigning the IP Address to the Camera	7
Assigning an IP address using the IP Setup Program	7
When using Windows XP Service Pack 2	9
When using Windows Vista	11
Accessing the Camera Using the Web Browser	13
Basic Configuration by the Administrator	15
Operating the Camera	16
Administrator and User	16
Logging in to Homepage - Welcome Page	17
Logging in as a User	17
Displaying the setting window for the administrator directly	18
About Viewers	18
Configuration of Main Viewer	19
Main menu	20
Camera Control Section	20
Monitor Image	21
Controlling the Monitor Image	22
Monitoring the camera image	22
Zooming in the monitor image	22
Capturing a Monitor Image	23
Capturing a monitor image	23
Saving the captured image	23
Operating the camera	24
Controlling via the control panel	24
Control the camera in the monitor window	24
Zoom an image by the camera zoom bar	25
Moving the camera to the preset position	25
Controlling the camera on a panorama image	26
Facing the camera toward the specified point	26
Sending an Image File	27
Sending a Monitor Image via e-Mail	27
Sending a Monitor Image to an FTP Server	27
Recording a Still Image in the Memory of the Camera	27
Controlling Alarm output 1, 2	28
Controlling Day/Night Function	28
Switching TCP/UDP Transmission Mode	29
Administrating the Camera	30
Basic Operations of Administrator Menu	30
How to set Administrator menu	30
Configuration of Administrator Menu	31
Configuring the System - System setting menu	33
System Tab	33
Date & time Tab	34
Initialize Tab	35
System log Tab	36
Access log tab	36
Setting the Camera Image and Audio - Camera setting Menu	36
Common Tab	36
Picture Tab	38
Day/Night Tab	39
MPEG4 Tab	40
JPEG Tab	41
Reset Tab	41
Configuring the Network - Network setting Menu	42
Network Tab	42
Wireless Tab - Setting of Wireless Connection	43
Wireless authentication Tab - Setting the Wireless Authentication	44
PPPoE Tab - Setting of PPPoE Connection	45
Dynamic IP address notification Tab - Notifying the IP Address	45
Setting the User - User setting Menu	47
Setting the Security - Security setting Menu	48
Sending an Image via mail - e-Mail (SMTP) setting Menu	49
Common Tab - Setting the e-Mail (SMTP) Function	49
Alarm sending Tab - Setting the mail sending mode when detecting the alarm	50
Periodical sending Tab - Setting the periodical mail sending mode	51
Sending Images to FTP Server - FTP client setting Menu	52
Common Tab - Setting the FTP Client Function	52
Alarm sending Tab - Setting the FTP client action when detecting the alarm	52
Periodical sending Tab - Setting the Periodical FTP Client Activity	53
Recording Images in Memory - Image memory setting Menu	54
Common Tab - Setting the Image memory Function	54
Alarm recording Tab - Setting the Image Memory Function when Detecting the Alarm	55
Periodical recording Tab - Setting the Periodical recording mode	56
Folder structure of image memory	57
Downloading Images from the Camera - FTP server setting Menu	58
Setting the Alarm Output - Alarm output setting Menu	59
Alarm output 1, 2 Tab	59
Setting the Operations from the Viewer Page - Trigger setting Menu	60
Setting the Schedule - Schedule setting Menu	62
Setting the Alarm Buffer - Alarm buffer setting Menu	63
Setting the Motion Detection Function - Motion detection setting Menu	64
Setting the Motion Detection Area, Sensitivity and Threshold level	64
Saving the Camera Position and Action - Preset position setting Menu	65
Position tab - Saving PanTilt and Zoom position	65
Tour Tab - Setting a Tour	66
Transmitting with External Equipment Using the External Serial Terminal - Serial setting Menu	67
Using DDNS Service - DDNS Setting Menu	69
Others	72
Using the Supplied Setup Program	72
Starting the Setup Program	72
Bandwidth Control Tab	72
Date time Tab	73
PPPoE Tab	73
Rebooting the Camera	74
Using the SNC audio upload tool - Transmitting Audio to Camera	74
Installing the SNC audio upload tool	74
Connecting the Camera to the Computer	75
Using the SNC audio upload tool	75
Using the SNC video player - Playing Video/ Audio File Recorded on Camera	80
Download the SNC video player	80
Using the SNC video player	80
Using the SNC panorama creator - Creating a Panorama Image	81
Installing the SNC panorama creator	81
Using the SNC panorama creator	81
Creating and transmitting a panorama image	82
Saving a custom image to the camera	82
Using the Custom Homepage Installer	83
Uploading the homepage to the camera using the Custom Homepage Installer	83
Assigning the IP Address to the Camera Using ARP Commands	86
Using the SNMP	86
Glossary	88

Match case Limit results 1 per page

Operating the Camera

Configuration of Main Viewer

PanTilt control

Click the arrow button of the direction in which you

want to move the camera. Keep it pressed to move the

camera continuously.

To return to the home position, click

button.

Zoom control

Press

to zoom out, and press

to zoom in.

Zooming continues while the button remains pressed.

Focus control

To focus on a nearby object, press

. To focus on a

distance object, press

By pressing

, the focus is set to the

optimum position.

Note

To control the focus manually, set “Focus mode” of the

Camera setting menu to

Manual

. (page 38)

Trigger

(Displayed only when the camera

Viewer mode

(page 47) is set to

Full

and one or more triggers are

enabled in the Trigger menu (page 60).)

Select the function you want to use from the drop-down

list and click

. The selected function is activated.

The selectable functions are as follows:

– send the still image files attached to an e-mail

(page 27)

– send the still image files to an FTP server (page 27)

–

record the still image files in the built-in memory, on a

CF memory card (not supplied) (page 27)

– switch the alarm output on/off (page 28)

– switch the Day/Night function on/off (page 28)

Transmission (Switching the TCP/

UDP transmission mode)

(Displayed only when the camera Video mode (page

36)

is set to

MPEG4

and using the ActiveX viewer.)

Each click switches the transmission mode of the video/

audio data among TCP mode, UDP (Unicast) mode and

UDP (Multicast) mode. (page 29)

The last selected mode is saved in the computer, and will

stay selected for the next starting.

Volume

(Displayed when the Microphone (page 38) is set to

Drag the bar of

icon to adjust the volume.

When you click

icon, the icon changes to

and

the audio output stops. To output the audio, click

again.

Note

does not appear when the Java applet

viewer is used,

Audio codec

may not be set to

G.711 (64

kbps)

(page 38), or Java may not be installed correctly.

To check if Java is installed correctly, refer to “Java

applet viewer” of

“About Viewers” on page 18.

Monitor Image

The image shot by the camera is shown here. Date and

time is displayed at the top of the window.