Sony SNC-RZ25N User Guide - Page 66
Sony SNC-RZ25N - Network Camera Manual
UPC - 027242662575
View all Sony SNC-RZ25N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Reset: When you press Reset, deletes the saved contents of the current selected preset number. Note Position at alarm The camera can synchronize the preset position with Sensor input 1 or 2 or with the activity detection function. If an alarm is detected by the sensor input or the activity detection function, the camera automatically moves to the corresponding preset position. Sensor input1: Select a preset position to synchronize with the alarm from Sensor 1. Sensor input2: Select a preset position to synchronize with the alarm from Sensor 2. Motion detection: Select a preset position to synchronize with the alarm from the motion detection. In the case not to synchronize with any preset number, select None. Note OK/Cancel is effective for the Position at alarm settings only in this tab. Tour Tab - Setting a Tour Up to 16 positions can be programmed, and the camera moves to the programmed positions sequentially (Tour). Up to 5 groups can be set as the Tour. Administrating the Camera In the case that the synchronized preset position is specified, the alarm event that happens during moving to the preset position will be invalid. List of the preset positions When you click Reset position table, displays each preset number and its name on the another window. Tour name Select a tour name from among A, B, C, D and E. Stay time Type a period of time for which the camera is to stay at each preset position, between 1 and 3600 seconds. Speed Select the Pan speed from the list box. The camera pans faster with a higher number setting. Sequence Select and set preset number 1 to 16 for each of 16 list boxes. The camera moves to the preset position saved in the selected preset number sequentially. The sequence of camera movement starts from the preset position specified in the list boxes from left to the right, then from top to bottom. After bottom right, the camera returns to top left. This sequence is cyclical. If you select End in the list box, the program ends before this and the camera returns to the first preset position. This sequence is cyclical. OK/Cancel See "Buttons common to every setting menu" on page 31. 66 Saving the Camera Position and Action - Preset position setting Menu