Sony SNC-RZ25N User Guide - Page 65

Image memory and Alarm output notification will not work. Make sure to close Motion detection setting menu after setting. • Before using the Motion detection, perform the operation test to confirm correct operation. • The Motion detection may not operate correctly in the following cases: - while changing a setting on the Camera setting menu - when the object is dark - when the camera is installed in an unstable place that causes vibration to the camera - when a small bit rate (64 kbps, 128kbps) is selected in Bit rate setting of MPEG4 Saving the Camera Position and Action - Preset position setting Menu When you click Preset Position of the administrator setting menu, the Preset position setting menu is displayed. In this menu, PanTilt and Zoom position can be saved and you can set a Tour (program). Position tab - Saving PanTilt and Zoom position The camera can save up to 16 items, PanTilt or Zoom for example. Administrating the Camera Preset No. Select a preset number from 1 to 16 in the list box. Preset position name Write the preset position name of the selected preset number. Recall: When you click Recall, the camera moves to the position of the selected preset number at present. Set: Use it to save the camera position to a preset number. Carry out the following steps. 1 2 3 Move the camera to the position to be saved while you are checking the image with the main viewer. Select a preset number for saving, and write the preset position name. Click the registration button. The camera position is saved. Saving the Camera Position and Action - Preset position setting Menu 65