Home » Sony Manuals » Webcams » Sony SNC-RZ25N » Manual Viewer

Sony SNC-RZ25N User Guide - Page 52

Sony SNC-RZ25N - Network Camera Manual

UPC - 027242662575

Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Sending Images to FTP Server - FTP client setting Menu When you click FTP client on the Administrator menu, the FTP client setting menu appears. Use this menu to set up for capturing and sending still images to an FTP server. By using FTP client function, you can send the image and audio file which has been shot and recorded linked with the external sensor input or with the built-in motion detection function to FTP server. The image file can also be sent periodically. FTP client setting menu is composed of three tabs Common, Alarm sending and Periodical sending. Password Type the password for the FTP server. Re-type password To confirm the password, type the same characters as you typed in the Password box. Passive mode Set whether you use the passive mode of FTP server or not when connecting to FTP server. Select On to connect to FTP server using the passive mode. OK/Cancel See "Buttons common to every setting menu" on page 31. Common Tab - Setting the FTP Client Function Alarm sending Tab - Setting the FTP client action when detecting the alarm Set to forward the image and audio file to the specified FTP server linked with the alarm detection by the external sensor input or by the built-in motion detection function. Administrating the Camera FTP client function To activate the FTP client function, select On. The FTP client setting menu appears. When you do not wish to use the FTP client function, select Off. Note Alarm sending Select On to send the image and audio file to FTP server linked with the alarm detection. The frame rate and operability on the main viewer may decrease while a file is being transmitted by the FTP client function. Remote path Type the path to the destination up to 64 characters. FTP server name Type the FTP server name to upload still images up to 64 characters, or the IP address of the FTP server. Image file name Type the file name you want to assign to the images when sending to the FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for naming. User name Type the user name for the FTP server. 52 Sending Images to FTP Server - FTP client setting Menu

Section	Page
Table of Contents	2
Overview	4
Features	4
Phenomena Specific to CCD Image Sensors	5
How to Use This User’s Guide	6
System Requirements	6
Preparation	7
Assigning the IP Address to the Camera	7
Assigning an IP address using the IP Setup Program	7
When using Windows XP Service Pack 2	9
When using Windows Vista	11
Accessing the Camera Using the Web Browser	13
Basic Configuration by the Administrator	15
Operating the Camera	16
Administrator and User	16
Logging in to Homepage - Welcome Page	17
Logging in as a User	17
Displaying the setting window for the administrator directly	18
About Viewers	18
Configuration of Main Viewer	19
Main menu	20
Camera Control Section	20
Monitor Image	21
Controlling the Monitor Image	22
Monitoring the camera image	22
Zooming in the monitor image	22
Capturing a Monitor Image	23
Capturing a monitor image	23
Saving the captured image	23
Operating the camera	24
Controlling via the control panel	24
Control the camera in the monitor window	24
Zoom an image by the camera zoom bar	25
Moving the camera to the preset position	25
Controlling the camera on a panorama image	26
Facing the camera toward the specified point	26
Sending an Image File	27
Sending a Monitor Image via e-Mail	27
Sending a Monitor Image to an FTP Server	27
Recording a Still Image in the Memory of the Camera	27
Controlling Alarm output 1, 2	28
Controlling Day/Night Function	28
Switching TCP/UDP Transmission Mode	29
Administrating the Camera	30
Basic Operations of Administrator Menu	30
How to set Administrator menu	30
Configuration of Administrator Menu	31
Configuring the System - System setting menu	33
System Tab	33
Date & time Tab	34
Initialize Tab	35
System log Tab	36
Access log tab	36
Setting the Camera Image and Audio - Camera setting Menu	36
Common Tab	36
Picture Tab	38
Day/Night Tab	39
MPEG4 Tab	40
JPEG Tab	41
Reset Tab	41
Configuring the Network - Network setting Menu	42
Network Tab	42
Wireless Tab - Setting of Wireless Connection	43
Wireless authentication Tab - Setting the Wireless Authentication	44
PPPoE Tab - Setting of PPPoE Connection	45
Dynamic IP address notification Tab - Notifying the IP Address	45
Setting the User - User setting Menu	47
Setting the Security - Security setting Menu	48
Sending an Image via mail - e-Mail (SMTP) setting Menu	49
Common Tab - Setting the e-Mail (SMTP) Function	49
Alarm sending Tab - Setting the mail sending mode when detecting the alarm	50
Periodical sending Tab - Setting the periodical mail sending mode	51
Sending Images to FTP Server - FTP client setting Menu	52
Common Tab - Setting the FTP Client Function	52
Alarm sending Tab - Setting the FTP client action when detecting the alarm	52
Periodical sending Tab - Setting the Periodical FTP Client Activity	53
Recording Images in Memory - Image memory setting Menu	54
Common Tab - Setting the Image memory Function	54
Alarm recording Tab - Setting the Image Memory Function when Detecting the Alarm	55
Periodical recording Tab - Setting the Periodical recording mode	56
Folder structure of image memory	57
Downloading Images from the Camera - FTP server setting Menu	58
Setting the Alarm Output - Alarm output setting Menu	59
Alarm output 1, 2 Tab	59
Setting the Operations from the Viewer Page - Trigger setting Menu	60
Setting the Schedule - Schedule setting Menu	62
Setting the Alarm Buffer - Alarm buffer setting Menu	63
Setting the Motion Detection Function - Motion detection setting Menu	64
Setting the Motion Detection Area, Sensitivity and Threshold level	64
Saving the Camera Position and Action - Preset position setting Menu	65
Position tab - Saving PanTilt and Zoom position	65
Tour Tab - Setting a Tour	66
Transmitting with External Equipment Using the External Serial Terminal - Serial setting Menu	67
Using DDNS Service - DDNS Setting Menu	69
Others	72
Using the Supplied Setup Program	72
Starting the Setup Program	72
Bandwidth Control Tab	72
Date time Tab	73
PPPoE Tab	73
Rebooting the Camera	74
Using the SNC audio upload tool - Transmitting Audio to Camera	74
Installing the SNC audio upload tool	74
Connecting the Camera to the Computer	75
Using the SNC audio upload tool	75
Using the SNC video player - Playing Video/ Audio File Recorded on Camera	80
Download the SNC video player	80
Using the SNC video player	80
Using the SNC panorama creator - Creating a Panorama Image	81
Installing the SNC panorama creator	81
Using the SNC panorama creator	81
Creating and transmitting a panorama image	82
Saving a custom image to the camera	82
Using the Custom Homepage Installer	83
Uploading the homepage to the camera using the Custom Homepage Installer	83
Assigning the IP Address to the Camera Using ARP Commands	86
Using the SNMP	86
Glossary	88

Match case Limit results 1 per page

Administrating the Camera

Sending Images to FTP Server — FTP client setting Menu

Sending Images to FTP

Server

— FTP client setting Menu

When you click

FTP client

on the Administrator menu,

the FTP client setting menu appears.

Use this menu to set up for capturing and sending still

images to an FTP server.

By using FTP client function,

you can send the image and audio file which has been

shot and recorded linked with the external sensor input

or with the built-in motion detection function to FTP

server. The image file can also be sent periodically.

FTP client setting menu is composed of three tabs

Common

Alarm sending

and

Periodical sending

Common Tab — Setting the FTP

Client Function

FTP client function

To activate the FTP client function, select

The FTP

client setting menu appears.

When you do not wish to use the FTP client function,

select

Off

Note

The frame rate and operability on the main viewer may

decrease while a file is being transmitted by the FTP

client function.

FTP server name

Type the FTP server name to upload still images up to 64

characters, or the IP address of the FTP server.

User name

Type the user name for the FTP server.

Password

Type the password for the FTP server.

Re-type password

To confirm the password, type the same characters as

you typed in the Password box.

Passive mode

Set whether you use the passive mode of FTP server or

not when connecting to FTP server. Select

connect to FTP server using the passive mode.

OK/Cancel

See “Buttons common to every setting menu” on page

31.

Alarm sending Tab — Setting the

FTP client action when detecting

the alarm

Set to forward the image and audio file to the specified

FTP server linked with the alarm detection by the

external sensor input or by the built-in motion detection

function.

Alarm sending

Select

to send the image and audio file to FTP server

linked with the alarm detection.

Remote path

Type the path to the destination up to 64 characters.

Image file name

Type the file name you want to assign to the images

when sending to the FTP server.

You can use up to 10

alphanumeric characters, - (hyphen) and _ (underscore)

for naming.