Sony SNC-RZ25N User Guide - Page 45
Sony SNC-RZ25N - Network Camera Manual
UPC - 027242662575
View all Sony SNC-RZ25N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
PPPoE Tab - Setting of PPPoE Connection Use it when you connect the camera with PPPoE (Pointto-Point Protocol over Ethernet). PPPoE connection is the protocol that is widely used in xDSL (Digital Subscriber Line such as ADSL, VDSL or SDSL) as the authentication and connection system. Primary DNS server Type the IP address of the primary DNS server. Secondary DNS server Type the IP address of the secondary DNS server. OK/Cancel See "Buttons common to every setting menu" on page 31. Dynamic IP address notification Tab - Notifying the IP Address When the DHCP setting is set to On or PPPoE setting is set to On on the Network tab, you can send notification of the completion of the network settings using the SMTP or HTTP protocol. Administrating the Camera PPPoE Set whether you connect the camera using PPPoE function or not. When On is selected, PPPoE connection is used. IP address When you connect to the network by PPPoE function, IP address obtained at PPPoE connection is displayed. User ID Type the user ID for the authentication necessary for PPPoE connection. Type up to 64 characters. e-Mail (SMTP) notification Select On to send an e-Mail when the DHCP setting is completed. Password Type the password for the authentication necessary for PPPoE connection. Type from 1 to 32 characters. SMTP server name Type the name or IP address of the SMTP server to use for sending an e-Mail, up to 64 characters. Re-type password To confirm the password, re-type the password typed in the password box. Authentication Select the authentication required when you send an eMail. Off: Select if no authentication is required when an eMail is sent. On: When authentication is required an e-Mail is sent, select one of the authentication methods from the followings. SMTP: Select if authentication is required when an e-Mail is sent. POP before SMTP: Select when POP before SMTP is required when an e-Mail is sent. Obtain DNS server address automatically Select to obtain the address of DNS server automatically. Use the following DNS server address Select to set the fixed address as the IP address of DNS server. Configuring the Network - Network setting Menu 45