Sony SNC-RZ25N User Guide - Page 56

Administrating the Camera

Recording Images in Memory — Image memory setting Menu

56

Alarm recording

Select

On

to set to record the image and audio file to the

memory linked with the external sensor input or with the

built-in motion detection function.

Image file name

Type the file name you want to assign to the images

when saving in the built-in memory.

You can use up to

10 alphanumeric characters, - (hyphen) and _

(underscore) for naming.

Suffix

Select a suffix to add to the file name.

Date & time:

The Date & time suffix is added to the

Image file name.

The Date & time suffix consists of lower two-digits

of year (2 digits), month (2 digits), date (2 digits),

hour (2 digits), minute (2 digits), second (2 digits)

and consecutive number (2 digits), thus 14-digit

number is added to the file name.

Sequence number:

A consecutive number of 10 digits

between 0000000001 and 4294967295 and an

consecutive 2 digits number is added to the Image

file name.

Tip

A consecutive number added to

Date & time

and

Sequence number

is used to identify each of multiple

files created with one alarm event.

Sequence number clear

Click

Clear

to reset the Sequence number suffix to 1.

Alarm

Select the connected alarm.

Sensor input1:

The external sensor which is connected

to sensor input1 of the camera I/O port.

Sensor input2:

The external sensor which is connected

to sensor input2 of the camera I/O port.

Motion detection:

Click

Motion detection

button, and

the Motion detection setting menu is displayed. You

can set the motion detection function (page 53).

Notes

•

Motion detection

works only when the Video mode is

set to

MPEG4

and the

Cropping

is set to

Off

.

•

In the case that the synchronized preset position is

specified, the alarm event that happens during moving

to the preset position will be invalid.

Effective period

Set the period when the alarm detection is effective.

Always:

The alarm detection is always effective.

Schedule:

You can specify the period when the alarm

detection is effective in the schedule setting in the

other section.

Click

Schedule

and the setting menu for the effective

period is displayed. (“Setting the Schedule —

Schedule setting Menu” on page 62)

Alarm buffer

Select

Use alarm buffer

when you forward the image/

audio of before and after the alarm detection (pre-alarm,

post-alarm).

If you do not select it, only the image of the moment of

the alarm detection is forwarded.

Click

Alarm buffer

to display the Alarm buffer setting

menu.

For details, see “Setting the Alarm Buffer — Alarm

buffer setting Menu” on page 63.

OK/Cancel

See “Buttons common to every setting menu” on page

31.

Periodical recording Tab — Setting

the Periodical recording mode

You can set to record the image file to the memory

periodically.

Periodical recording

Select

On

when you want to use periodical recording. If

you select

Off

, the Periodical recording is not executed.

Image file name

Type the file name of the image recorded to the memory

up to 10 alphanumeric, - (hyphen) and _ (under score).

Section	Page
Table of Contents	2
Overview	4
Features	4
Phenomena Specific to CCD Image Sensors	5
How to Use This User’s Guide	6
System Requirements	6
Preparation	7
Assigning the IP Address to the Camera	7
Assigning an IP address using the IP Setup Program	7
When using Windows XP Service Pack 2	9
When using Windows Vista	11
Accessing the Camera Using the Web Browser	13
Basic Configuration by the Administrator	15
Operating the Camera	16
Administrator and User	16
Logging in to Homepage - Welcome Page	17
Logging in as a User	17
Displaying the setting window for the administrator directly	18
About Viewers	18
Configuration of Main Viewer	19
Main menu	20
Camera Control Section	20
Monitor Image	21
Controlling the Monitor Image	22
Monitoring the camera image	22
Zooming in the monitor image	22
Capturing a Monitor Image	23
Capturing a monitor image	23
Saving the captured image	23
Operating the camera	24
Controlling via the control panel	24
Control the camera in the monitor window	24
Zoom an image by the camera zoom bar	25
Moving the camera to the preset position	25
Controlling the camera on a panorama image	26
Facing the camera toward the specified point	26
Sending an Image File	27
Sending a Monitor Image via e-Mail	27
Sending a Monitor Image to an FTP Server	27
Recording a Still Image in the Memory of the Camera	27
Controlling Alarm output 1, 2	28
Controlling Day/Night Function	28
Switching TCP/UDP Transmission Mode	29
Administrating the Camera	30
Basic Operations of Administrator Menu	30
How to set Administrator menu	30
Configuration of Administrator Menu	31
Configuring the System - System setting menu	33
System Tab	33
Date & time Tab	34
Initialize Tab	35
System log Tab	36
Access log tab	36
Setting the Camera Image and Audio - Camera setting Menu	36
Common Tab	36
Picture Tab	38
Day/Night Tab	39
MPEG4 Tab	40
JPEG Tab	41
Reset Tab	41
Configuring the Network - Network setting Menu	42
Network Tab	42
Wireless Tab - Setting of Wireless Connection	43
Wireless authentication Tab - Setting the Wireless Authentication	44
PPPoE Tab - Setting of PPPoE Connection	45
Dynamic IP address notification Tab - Notifying the IP Address	45
Setting the User - User setting Menu	47
Setting the Security - Security setting Menu	48
Sending an Image via mail - e-Mail (SMTP) setting Menu	49
Common Tab - Setting the e-Mail (SMTP) Function	49
Alarm sending Tab - Setting the mail sending mode when detecting the alarm	50
Periodical sending Tab - Setting the periodical mail sending mode	51
Sending Images to FTP Server - FTP client setting Menu	52
Common Tab - Setting the FTP Client Function	52
Alarm sending Tab - Setting the FTP client action when detecting the alarm	52
Periodical sending Tab - Setting the Periodical FTP Client Activity	53
Recording Images in Memory - Image memory setting Menu	54
Common Tab - Setting the Image memory Function	54
Alarm recording Tab - Setting the Image Memory Function when Detecting the Alarm	55
Periodical recording Tab - Setting the Periodical recording mode	56
Folder structure of image memory	57
Downloading Images from the Camera - FTP server setting Menu	58
Setting the Alarm Output - Alarm output setting Menu	59
Alarm output 1, 2 Tab	59
Setting the Operations from the Viewer Page - Trigger setting Menu	60
Setting the Schedule - Schedule setting Menu	62
Setting the Alarm Buffer - Alarm buffer setting Menu	63
Setting the Motion Detection Function - Motion detection setting Menu	64
Setting the Motion Detection Area, Sensitivity and Threshold level	64
Saving the Camera Position and Action - Preset position setting Menu	65
Position tab - Saving PanTilt and Zoom position	65
Tour Tab - Setting a Tour	66
Transmitting with External Equipment Using the External Serial Terminal - Serial setting Menu	67
Using DDNS Service - DDNS Setting Menu	69
Others	72
Using the Supplied Setup Program	72
Starting the Setup Program	72
Bandwidth Control Tab	72
Date time Tab	73
PPPoE Tab	73
Rebooting the Camera	74
Using the SNC audio upload tool - Transmitting Audio to Camera	74
Installing the SNC audio upload tool	74
Connecting the Camera to the Computer	75
Using the SNC audio upload tool	75
Using the SNC video player - Playing Video/ Audio File Recorded on Camera	80
Download the SNC video player	80
Using the SNC video player	80
Using the SNC panorama creator - Creating a Panorama Image	81
Installing the SNC panorama creator	81
Using the SNC panorama creator	81
Creating and transmitting a panorama image	82
Saving a custom image to the camera	82
Using the Custom Homepage Installer	83
Uploading the homepage to the camera using the Custom Homepage Installer	83
Assigning the IP Address to the Camera Using ARP Commands	86
Using the SNMP	86
Glossary	88

Sony SNC-RZ25N User Guide - Page 56

Sony SNC-RZ25N - Network Camera Manual

Page 56 highlights