Sony STR-D1015 Operating Instructions - Page 15
eceiving, Broadcasts
View all Sony STR-D1015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
• eceiving Broadcasts ou can tune in a radio station directly or you can have the receiver scan all the stations until it finds the one 3u want. Once you preset stations on the receiver, you do not have to tune in the station every time. irect Tuning se direct tuning if you know the frequency of the station 3u want. For example, to tune in FM 102.50 MHz, press i", "0", "2", "5" and "O." you enter a frequency not covered by the tuning interval, to entered value is automatically rounded up or down to re closest covered value. uning intervals for direct tuning are set as follows: VI: 50 kHz interval M: 10 kHz interval (changeable to the 9 kHz interval) (See page 35) POWER -' ON FM MODE 6 6 O 4 Enter the frequency with the numeric buttons. The frequency number is displayed. Example 1: FM 102.50 MHz 4, FM102. 50MHz Example 2: AM 1350 kHz ttt 4, n 4:: E4 0'1C' CI I . H1'1 I kJ 13 Press TUNER. The station's frequency number is displayed. If you create a station index name (page 22), this name is displayed instead of the frequency number. If you enter an AM frequency, you do not have to enter the last "0". However, if you have changed the AM tuning interval to 9 kHz, you must enter till the last digit. To change the frequency Repeat steps 3 and 4. 2 Press FM/AM to select FM or AM. 3 Press DIRECT. If you enter a non-receivable frequency The entered digits blink in the frequency display area, and the station is not tuned in. If this occurs, enter the correct frequency. The frequency range of the receiver is as follows: • 87.50 to 108.0 MHz for FM, and 530 to 1710 kHz (10 kHz step) or 531 to 1710 kHz (9 kHz step) for AM If an FM stereo program is distorted You might want to change it to monaural. Press the FM MODE button to change the mode over to mono. You will not have the stereo effect, but the distortion will be reduced. To return to the stereo mode, press the button again. le'