Sony STR-D1015 Operating Instructions - Page 23

Scanning the Indexed Stations You can easily find the station you want by scanning the indexed stations. • • • • • Source In addition to indexing preset radio stations (see page 22), you can also create a name (index name) for program sources (e.g., CD, TAPE, etc.). For example, if you connected a second tape deck to the DAT/MD jacks, you will most likely want to display as "TAPE 2" (instead of "DAT/MD") when you use the second tape deck. The name you create appears in the display whenever you select that program source. You can use up to 11 letters and symbols for each index name. 1 Press TUNER. The station index name you created appears on the display, The frequency number appears if you have not created the station index name on that station. 2 Press DISPLAY until °INDEX MODE" appears on the display. Each time you press this buttoh, frequency and station index name (if you have created one) alternately appears on the display. If you have not stored an index name " appears. 3 Select the station you want • To select a station in the same index: Press PRESET TUNING + for a higher channel index station and press PRESET TUNING - for a lower channel index station. • To select an index station other than the displayed index station: Press INDEX SELECT/TUNING + or - once. Then press PRESET TUNING + for a higher channel index station and press PRESET TUNING - for a lower channel index station. 1 2 1 Select the program source (except TUNER) that you want to create an index name for. 2 Press DISPLAY to select the NAME mode. "NAME MODE" appears. 3 Press DPC MODE until the INDEX indicator lights up. 4 Create an index name. / - 4 To select a letter (A to Z) or number (1 to 9), press A or v. To change the position within the name, press< or >. 5 Repeat steps 1 to 4 for all other program sources you want to assign an index name to. 23