Sony STR-D1015 Operating Instructions - Page 16
Receiving, Broadcasts
View all Sony STR-D1015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Receiving Broadcasts Automatic Tuning In automatic tuning, the receiver scans all the stations to locate the one you want. If you do not know the frequency of the station that you want, use automatic tuning. POWER -. ON LEVEL 4 2 0 0 0 0 - -- - UM Presetting Stations You will most likely want to preset the stations you listen to often. The receiver can store a total of 30 FM or AM stations. Up to 10 stations can be stored in three different memory pages: A, B and C. (For example, a station is stored as A7 or B3.) POWER -• ON 3 0 O 4 0 0 0 0 irm :' O 66 0 En 1 Press TUNER. The station's frequency number is displayed. If you create a station index name (page 22), this name is displayed instead of the frequency number. 2 If the index name is displayed, press DISPLAY until "NORMAL MODE" appears on the display. The frequency number is displayed. 3 Press FM/AM to select FM or AM. 4 Press INDEX SELECT/TUNING + or -. For a higher frequency, press INDEX SELECT/ TUNING +. For a lower frequency, press INDEX SELECT/ TUNING -. When a station is received, automatic tuning stops. To receive other stations, press the button again. If the scanning stops frequently while receiving FM stations Press LEVEL so that the receiver stops only at the stations with strong signals. To cancel this (to receive stations with weaker signals), press LEVEL until HIGH goes off. 5 1 • 1 Press TUNER. The station's frequency number is displayed. If you create a station index name (page 22), this name is displayed instead of the frequency number. 2 Tune in the station you want. (See "Direct Tuning" on page 15 or "Automatic Tuning" in the left column.) 3 Press MEMORY. "MEMORY" is displayed. 4 While "MEMORY" appears, press SHIFT to select a memory page: A, B or C. Each time you press SHIFT, A, B or C is displayed. 5 While "MEMORY" appears, press the number you want to use. Repeat steps from 2 through 5 for presetting other stations. To change a preset station Preset a new station on the number of the station to be changed. The station will be replaced. IMPORTANT If the power cord is disconnected for more than one month, the preset stations will disappear from the receiver's memory, and you will have to preset the stations again. 16