Home » Sony Manuals » Audio Components » Sony STR-DA4600ES » Manual Viewer

Sony STR-DA4600ES Operating Instructions (Large File - 17.22 MB) - Page 118

Zone2 Line Out Level, 12V Trigger, To preset the volume for main, zone/zone 2

Add to My Manuals
Save this manual to your list of manuals

Page 118 highlights

1 Select the zone for which you want to adjust the volume, then press . 2 Select "Volume," then press . 3 Adjust the volume, then press . To preset the volume for main zone/zone 2 You can preset the volume of turning the power on for each zone. 1 Select the zone for which you want to preset the volume, then press . 2 Select "Preset Volume," then press . 3 Adjust the volume, then press . During the adjustment, the sound is output at the volume level to which you have adjusted it, regardless of the value of MASTER VOLUME control. If you select "OFF," each zone is activated at the same volume as that in effect when you turned the power off last time. Note • You cannot preset the volume for zone 2 in the following cases. - "Sur Back Assign" is set to "OFF" or "BIAMP." - "Zone2 Line Out Level" is set to "FIXED." Zone2 Line Out Level Lets you set the volume control for the ZONE 2 AUDIO OUT jacks to "VARIABLE" or "FIXED." For details, see "Set the volume control for zone 2" (page 94) x VARIABLE x FIXED x OFF Lets you turn off output of 12V triggers even when the main receiver is turned on. x Ctrl Lets you turn the output of 12V triggers on or off manually using the control command of an external control device. x Zone Lets you turn the output of 12V triggers on or off based on whether the selected zone is turned on or off. x Input Lets you turn on the output of 12V triggers when the preset input is selected. When you select "Input," the setting display which sets each input trigger to on/off appears. Press V/v to select the input, then press to check the box. x HDMI-A Lets you turn the output of 12V triggers on or off based on the output setting of the HDMI OUT A jack. x HDMI-B Lets you turn the output of 12V triggers on or off based on the output setting of the HDMI OUT B jack. Tip Even when this receiver is standby mode (press ?/1 on the remote to turned off this receiver), the receiver in zone 2 or zone 3 remains turned on. To turn off all receivers, press ?/1 and AV ?/1 on the multifunction remote at the same time (SYSTEM STANDBY). 12V Trigger You can turn the receiver on or off in another zone, or select various options for use of the 12V Trigger function. 118GB

Section	Page
Table of Contents	6
Description and location of parts	8
Getting Started	19
Checking the connection appropriate for your components	19
1: Installing speakers	20
2: Connecting the monitor	24
3: Connecting the video components	25
4: Connecting the audio components	34
5: Connecting the IR Blaster	38
6: Connecting the antennas (aerials)	39
7: Connecting to the network	40
8: Preparing the receiver and the remote	42
9: Setting the speakers	43
10: Calibrating the appropriate speaker settings automatically (Auto Calibration)	46
11: Configuring the network settings of the receiver	52
12: Preparing a computer to use as a server	52
Guide to on-screen display operation	54
Playback	57
Enjoying sound/images from the component connected to the receiver	57
Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT	58
Operating the TDM-iP50 using the GUI menu of the receiver	59
Tuning	62
Listening to FM/AM radio	62
Presetting FM/AM radio stations	64
Listening to satellite radio	65
Connecting a satellite radio tuner	65
Preparing to listen to a satellite radio	66
Selecting a channel of the satellite radio	66
Presetting satellite radio channels	68
Restricting access to specific channels (Parental Lock)	68
Enjoying Surround Sound	72
Playing back with 2-channel sound	72
Playing back with multi-channel surround	73
Enjoying a surround effect for music	74
Enjoying a surround effect for movies	76
Using Network Features	79
About the network functions of the receiver	79
Enjoying content stored on the server	80
Using a controller	83
Listening to Rhapsody	84
Listening to SHOUTcast	87
Features of the Setup Manager application software	88
Using Multi-zone Features	90
What you can do with the Multi-zone function	90
Making a multi-zone connection	90
Setting the speakers in zone 2	94
Switching the zone setting of the remote	95
Operating the receiver from another zone (ZONE 2/ZONE 3 operations)	95
Using Other Features	97
Using “BRAVIA” Sync features	97
Switching the monitors that output the HDMI video signals	99
Outputting the HDMI signals even when the receiver is in standby mode (Pass Through)	100
Switching between digital and analog audio	101
Enjoying the sound/images from other inputs (Input Assign)	102
Using the sleep timer	104
Enjoying the surround effect at low volume levels (Night Mode)	104
Recording using the receiver	105
Switching the command mode of the receiver and the remote	106
Using a bi-amplifier connection	107
Adjusting Settings	109
Using the setting menu	109
Auto Calibration	110
Speaker settings	112
Surround settings	116
EQ settings	117
Multi Zone settings	117
Audio settings	119
Video settings	121
HDMI settings	123
Network settings	124
Quick Click settings	127
System settings	127
Operating without connecting to a TV	129
Operating Each Component Using the On-screen Remote (Quick Click)	136
Operating components or lighting connected to the receiver using the on-screen remote (Quick Click)	136
Using Quick Click	137
Setting components that are operated by the on-screen remote	142
Performing several commands in sequence automatically with Quick Click (Macro Play)	142
Setting remote control codes that are not stored in Quick Click	144
Resetting the remote code for Quick Click	145
Operating Each Component Using the Multifunction Remote	146
Operating each component using the multifunction remote	146
Programming the remote	147
Performing several commands in sequence automatically (Macro Play)	151
Setting remote commander codes that are not stored in the remote	152
Clearing all the contents of the remote’s memory	154
Additional Information	155
Precautions	155
Troubleshooting	156
Specifications	163

Match case Limit results 1 per page

118

Select the zone for which you want to

adjust the volume, then press

Select “Volume,” then press

Adjust the volume, then press

To preset the volume for main

zone/zone 2

You can preset the volume of turning the

power on for each zone.

Select the zone for which you want to

preset the volume, then press

Select “Preset Volume,” then press

Adjust the volume, then press

During the adjustment, the sound is output

at the volume level to which you have

adjusted it, regardless of the value of

MASTER VOLUME control.

If you select “OFF,” each zone is activated

at the same volume as that in effect when

you turned the power off last time.

Note

• You cannot preset the volume for zone 2 in the

following cases.

–

“Sur Back Assign” is set to “OFF” or “BI-

AMP.”

–

“Zone2 Line Out Level” is set to “FIXED.”

Lets you set the volume control for the ZONE

2 AUDIO OUT jacks to “VARIABLE” or

“FIXED.” For details, see “Set the volume

control for zone 2” (page 94)

VARIABLE

FIXED

You can turn the receiver on or off in another

zone, or select various options for use of the

12V Trigger function.

OFF

Lets you turn off output of 12V triggers even

when the main receiver is turned on.

Ctrl

Lets you turn the output of 12V triggers on or

off manually using the control command of an

external control device.

Zone

Lets you turn the output of 12V triggers on or

off based on whether the selected zone is

turned on or off.

Input

Lets you turn on the output of 12V triggers

when the preset input is selected.

When you select “Input,” the setting display

which sets each input trigger to on/off appears.

Press

to select the input, then press

check the box.

HDMI-A

Lets you turn the output of 12V triggers on or

off based on the output setting of the HDMI

OUT A jack.

HDMI-B

Lets you turn the output of 12V triggers on or

off based on the output setting of the HDMI

OUT B jack.

Tip

Even when this receiver is standby mode (press

on the remote to turned off this receiver), the

receiver in zone 2 or zone 3 remains turned on. To

turn off all receivers, press

and AV

on the

multifunction remote at the same time (SYSTEM

STANDBY).

Zone2 Line Out Level

12V Trigger