Sony STR-DA4600ES Operating Instructions (Large File - 17.22 MB) - Page 152
Setting remote commander codes that are not stored in the remote, To cancel programming
View all Sony STR-DA4600ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Tip If the RM SET UP button flashes five times in step 1, and the macro programming process does not start, replace the batteries with new ones. To cancel programming Not pressing any button for 60 seconds cancels the settings. The previous command remains valid. Starting macro play 1 Press AMP. The AMP button lights up, and then turns off. 2 Press MACRO 1 or MACRO 2 to start the macro. The macro starts and execute the commands in the order you assigned them. While the commands are being sent, the AMP button flashes and the RM SET UP button lights up. When the commands have been sent, the RM SET UP and AMP buttons turn off. To erase a programmed macro 1 Press MACRO 1 or MACRO 2 for more than 1 second while pressing RM SET UP to clear the stored macro. The RM SET UP button flashes. 2 Press RM SET UP. Settings stored as macro are cleared. Setting remote commander codes that are not stored in the remote Even if a remote commander code is not one of the presets stored in the remote, it is possible for the remote to learn the code using the learning function. Note When setting up the receiver to learn the remote command modes, replace the batteries with new ones. THEATER RM SET UP ?/1 TV SHIFT Input buttons Buttons used to learn code* Buttons used to learn code 152GB * To store a new command on one of those buttons, press SHIFT beforehand.