Sony STR-DA4600ES Operating Instructions (Large File - 17.22 MB) - Page 119
Audio settings, Digital Legato Linear D.L.L.
View all Sony STR-DA4600ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Audio settings You can make settings for the audio to suit your preference. Notes • This function is useful when you use a large LCD or plasma monitor or a projector. • This function does not work in the following cases. - The multi-channel input is selected. - "2ch Analog Direct" is being used. Digital Legato Linear (D.L.L.) The D.L.L. function is Sony proprietary technology that allows low quality digital audio signals and analog audio signals to be played back with high quality sound. x OFF x AUTO 1 This function is available for lossy compression audio formats and analog audio signals. x AUTO 2 This function is available for Linear PCM signals, as well as lossy compression audio formats and analog audio signals. Note • This function works when "A.F.D. Auto" is selected. However, this function does not work in the following cases. - Linear PCM signals with a sampling frequency of other than 44.1 kHz are being received. - Dolby Digital Plus, Dolby Digital EX, Dolby TrueHD, DTS 96/24, DTS-ES Matrix 6.1, DTSHD Master Audio, or DTS-HD High Resolution Audio signals are being received. A/V Sync (Synchronizes audio and video output) Lets you delay the output of audio to minimize the time gap between audio output and visual display. x 0 ms - 300 ms You can adjust the delay from 0 ms to 300 ms in 10 ms steps. Dual Mono (Digital broadcast language selection) Lets you select the language you want when you listen to the dual audio of a digital broadcast. This feature only functions for Dolby Digital sources. x MAIN/SUB Sound of the main language will be output through the front left speaker, and sound of the sub language will be output through the front right speaker simultaneously. x MAIN Sound of the main language will be output. x SUB Sound of the sub language will be output. Decode Priority (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks or HDMI IN jacks. x PCM When signals from the DIGITAL IN jack are selected, PCM signals are given priority (to prevent interruption when playback starts). However, when other signals are input, there may be no sound, depending on the format. In this case, set this item to "AUTO." When signals from the HDMI IN jack are selected, only PCM signals are output from the connected player. When signals in any other format are received, set this item to "AUTO." Adjusting Settings continued 119GB