Sony STR-DA4600ES Operating Instructions (Large File - 17.22 MB) - Page 63
If you cannot tune in a station, Select Direct Tuning, then
View all Sony STR-DA4600ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Tuning 2 Press MENU. The menu is displayed on the TV screen. 3 Press V/v repeatedly to select " FM" or " AM," then press or b. 4 Select "Direct Tuning," then press . 5 Press SHIFT, then press the numeric buttons to enter the frequency, then press . Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0 Tip If you have tuned in an AM station, adjust the direction of the AM loop antenna (aerial) for optimum reception. If you cannot tune in a station "- - - .- - MHz" appears and then the display returns to the current frequency. Make sure you have entered the right frequency. If not, repeat step 5. If you still cannot tune in a station, the frequency is not used in your area. 2 While holding down TUNING MODE, press ?/1 on the receiver. 3 Change the current AM tuning scale to 9 kHz (or 10 kHz). To reset the scale to 10 kHz (or 9 kHz), repeat the procedure above. Note All preset stations will be erased when you change the tuning scale. Changing the AM tuning scale You can change the AM tuning scale to either 9 kHz or 10 kHz on the receiver. ?/1 TUNING MODE 1 Press ?/1 to turn off the receiver. 63GB