Sony TCD-D100 Operating Instructions primary manual - Page 28
Erasing, Start
View all Sony TCD-D100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Note If a Start ID is erased, the program number which is written on the same point will be erased also. 3 Press the START ID•ENTER button during Rehearsal function. " ilit? I I E " will appear for a moment. " START-ID will flash and the Start ID will be written. During this step the sound will be muted. To adjust the selected point Each time you press the 144 4411 or'* ►W button, the selected point shifts backwards or forwards in 0.3second increments, up to a maximum extent of about 10 seconds in either direction. Tape Selected point 0.3 Each time you press the 144 41 button. Each time you press the I button. Erasing Start IDs You can erase the Start IDs without erasing the contents of the existing recording. Erasing the Start ID is possible only when the tapecorder is in the stop or playback mode. 1 Press the l►► 1►►I or 144 441 button to locate the Start ID you want to erase. 2 Press the START ID•MODE button repeatedly until "ERASE" appears in the display of the main unit. 3 Press the START ID•ENTER button. 28EN I Recording ! V I I ERASE The tape will automatically rewind to find the Start ID of that program (track) and then START-ID " will flash in the display and start to erase the Start ID. During this step the sound will be muted. Playback will start when this mode is done.