Sony TCD-D100 Operating Instructions primary manual - Page 36

Operating with the AC Power Adaptor or Car Battery AC power adaptor AC-E45HG to DC IN 4.5V Tips • When the AC power adaptor or the car battery cord is connected to the DC IN 4.5V jack of the tapecorder, the internal batteries are automatically disconnected. Power is automatically supplied from the external power source. • When the AC power plug or the car battery cord is used for an extended period of time, the internal temperature of the tape-corder may rise. This is not a malfunction. • If the unit is in the stop mode for more than 10 minutes while using the house current or a car battery. The set functions will be canceled and the tape will be unloaded for tape protection. Using the AC power adaptor Connect the AC power adaptor AC-E45HG to the DC IN 4.5V jack. Notes on the AC power adaptor • Use only the AC-E45HG AC power adaptor. Do not use any other AC power adaptor. Polarity of the plug • Make sure that the cassette compartment lid is closed before disconnecting the AC power adaptor or removing the batteries. The cassette compartment lid may not close if the power source is disconnected or removed while the cassette compartment lid is open. In this case, connect the power adaptor or insert the batteries again. Using the car battery To operate the tape-corder with the car battery, connect the car battery cord Sony DCC-E245 (not supplied) to the DC IN 4.5V jack of the tape-corder. For more details, refer to its Operating Instructions manual. 3C'EN 0 Power Sources