Sony TCD-D100 Operating Instructions primary manual - Page 34
Replacing, batteries
View all Sony TCD-D100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Replacing the batteries Display Tips • This tape-corder is not equipped with a power switch. As a result, the LCD display will always be turned on as long as the batteries are inserted. However, power consumption is minimal and negligible. • The clock will return to its default setting (TU/ 97Y4M1D/ AM12HOOMOOS) if the batteries are removed from the tape-corder for a long time. In this case, set the clock again. Notes • If "b 1-3 T TEP '3" is still displayed after replacing the batteries press any button to clear this display. • When using the unit on batteries, do not use a dry battery and a rechargeable battery together. • The battery life may shorten depending on the temperature and the type of the battery. " bfl T T E P !-_1" or "(--\J" may not be displayed depending on the type of battery. Use the recommended NH-D100 battery. " When no plug is connected to the LINE OUT, REMOTE/Q or the REMOTE•DIGITAL l/ O jacks and the display backlight turned off. 34" Power Sources When to replace the batteries The status of the remaining battery power is displayed on the main unit. On the remote display, "f " will flash or appear when the batteries become weak. Display on the main unit E BATT F Battery full. 4, 4, 4, =E BATT F Replace both batteries with new ones. "bI3 T TERV" flashes and the tapecorder stops when used beyond this point. Display on the remote control -4 , • The batteries are weak. Replace both batteries with new ones. The batteries are completely exhausted. Battery life (Approx. hours) Battery Playback Recording Sony nickel metal hydride 4 rechargeable (NH-D100) 3 (3.5*) Sony alkaline LR6 (size AA) 2.5 1.5 (2-.5*) Values for battery life at 20°C and for long continuous playback or recording. Battery capacity decreases and battery life becomes shorter in low temperatures.