Sony VPL-FHZ120L Operating Instructions - Page 10
Connecting to an External Monitor, INPUT D, OUTPUT
View all Sony VPL-FHZ120L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
INPUT D This terminal is used when connecting the projector to a video device with a HDMI output terminal. HDMI output terminal INPUT D Video device HDMI cable (not supplied) Notes Use an HDMI cable with the HDMI logo. The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) signal or CEC (Consumer Electronics Control) signal. To fix the HDMI cable As shown in the following figure, fix the HDMI cable to the screw hole above the terminal using a commercially available-cable bracket. Screw hole Cable bracket (not supplied) Connecting to an External Monitor OUTPUT This terminal outputs projected images. The images are output when a computer signal is input from the RGB input terminal (INPUT A, INPUT B) or a video signal is input from the YPBPR input terminal (INPUT A). Display device RGB input terminal Mini D-sub 15pin cable (not supplied) 10