Sony VPL-FHZ120L Operating Instructions - Page 7

VOLUME key/ MUTING key, ID MODE switch CONTROL S output terminal

Get Sony VPL-FHZ120L PDF manuals and user guides View all Sony VPL-FHZ120L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

 VOLUME key/ MUTING key Not in use for the projector.  ID MODE switch (page 29) Sets an ID mode of the Remote Commander. If you assign a different ID number to each projector when multiple projectors are used, you can control only the projector with the same ID mode as that of the Remote Commander.  CONTROL S output terminal Not in use for the projector. About Remote Commander operation  Direct the Remote Commander toward the remote control receiver.  The shorter the distance between the Remote Commander and the projector is, the wider the angle within which the Remote Commander can control the projector becomes.  If there is any obstruction between the Remote Commander and the remote control receiver on the projector, the projector may not be able to receive signals from the Remote Commander. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
7
VOLUME key/ MUTING key
Not in use for the projector.
ID MODE switch (page 29)
Sets an ID mode of the Remote Commander. If
you assign a different ID number to each
projector when multiple projectors are used,
you can control only the projector with the
same ID mode as that of the Remote
Commander.
CONTROL S output terminal
Not in use for the projector.
About Remote Commander operation
Direct the Remote Commander toward the
remote control receiver.
The shorter the distance between the Remote
Commander and the projector is, the wider the
angle within which the Remote Commander can
control the projector becomes.
If there is any obstruction between the Remote
Commander and the remote control receiver on
the projector, the projector may not be able to
receive signals from the Remote Commander.