Sony VPL-FHZ120L Operating Instructions - Page 32
The Installation Menu
View all Sony VPL-FHZ120L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
The Installation Menu The Installation menu is used for installing the projector. Setting items Screen Fitting Multi Screen Color Space Color Matching Edge Blending Blend Settings Blend Fitting Description Adjusts the distortion of the projected image that occurs due to installation conditions or when a portion of the image spreads beyond the screen. Since the Keystone/Warping/Linearity adjustment is an electronic correction, the image may deteriorate. Warping: Select an adjustment point and move it vertically/horizontally to adjust the image distortion. V Keystone: Adjusts the vertical keystone distortion. The higher the setting, the narrower the upper side of the projected image. The lower the setting, the narrower the lower side of the projected image. *1 H Keystone: Adjusts the horizontal keystone distortion. The higher the setting, the shorter the right side of the projected image. The lower the setting, the shorter the left side of the projected image. *1 V Linearity: Adjusts the projected image so that the height of the upper half and lower half will be the same. The higher the setting, the narrower the upper half of the projected image. The lower the setting, the narrower the lower half of the projected image. H Linearity: Adjusts the projected image so that the width of the right half and left half will be the same. The higher the setting, the narrower the right half of the projected image. The lower the setting, the narrower the left half of the projected image. Reset: Resets all of the Screen Fitting items. When composing one screen with multiple projections, you can overlap portions of different projections or tile the projections. Changes the color space. The same adjustments as in "Color Space" (page 25) in the Picture menu are available. The color gamut is independently adjusted when "Picture Mode" is set to "sRGB." When "Picture Mode" is set to another mode, the color gamut is adjusted in a common setting. Adjusts the overall brightness and hue of the projected image. The brightness and color of the projected image may not match completely, even after you adjust "Brightness" and "Color." Adjust: Select one of 6 signal levels and adjust the brightness or hue. Level 1 - 6: Select the brightness level to adjust. Brightness: Adjusts the brightness of the selected brightness level. Color: Adjusts the hue of the selected brightness level. Reset: Resets all of the adjusted values. Reset: Resets all of the Blend Settings, Blend Fitting, and Zone Black Level values. Configure the Edge Blending setting for the top, bottom, right, and left of the screen respectively. Left/Right/Top/Bottom: Set the Edge Blending effect for each position. Edge Blending: Set "On" to set "Blending Range" or "Blend Start Pos." Blending Range: Set the width where images are overlapped. Blend Start Pos.: Set the start position from which images are overlapped. Blend Cursor: Displays the cursors at the start and end positions for edge blending. When set to "On," the cursors are displayed during Blend settings. Start Pos. Color: Select the color of the cursor that indicates the start position. End Pos. Color: Select the color of the cursor that indicates the end position. Reset: Resets all of the Blend Settings values. Finely adjusts the overlapped part. Adjust: Specify a position in the overlapped area and move image pixels. Use to select the position to adjust. Press the ENTER key to determine the position and use to move the image pixels vertically/horizontally so that neighboring images overlap. Reset: Resets all of the Blend Fitting values. 32