Sony VPL-FHZ120L Operating Instructions - Page 51
Updating the Software, Updating the Software via the USB Memory
View all Sony VPL-FHZ120L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
6 Replace the air filter and attach the filter holder. When attaching the filter holder, first insert the two tabs on the left, insert the three tabs on the right, and tighten the three screws. Tabs Tabs 7 Insert the tabs on the filter cover and slide the filter cover upward. Tabs Note Be sure to attach the air filter firmly; the power cannot be turned on if it is not attached securely. Updating the Software Updating the Software via the USB Memory To update the software of the unit, download files for update to your computer. Copy the downloaded files to your USB memory and insert the USB memory to the USB port of the unit. You are required to prepare a USB memory device, and the environment that your computer can be connected to the Internet and update files can be written on the USB memory. The update files can be downloaded from the Sony website. For details, refer to the following website. https://pro.sony.com https://www.sony.jp/vpl/ (Access from Japan) Updating the Software via the Network To update the software of the unit via the network, connect the computer to the LAN that the projector is connected to. The update files can be downloaded from the Sony website. For details, refer to the website or "Using the Software Update Function" on page 44. https://pro.sony.com https://www.sony.jp/vpl/ (Access from Japan) Notes USB 2.0 memory device up to 8 GB is available for the projector. However, all the USB memory devices are not guaranteed for use on the projector. When you format the USB memory, make sure to do so with a FAT32 file system. If you format the USB memory with a file system other than FAT32, you cannot use the USB memory for the projector. Some USB memory devices may not be supported. For details, refer to the above website. Depending on the environment, it may take about 80 minutes to update. Do not unplug the power cable while updating the software. 51